128x128

ct0517

Responses from ct0517

Eminent Technology ET-2 Tonearm Owners
Hi Frogman Glad you liked some of that music. The artist's liner notes appear to be listed under the site's store tab. Looks like Gliere is hidden under the first one. Jeff Beecher - Bass, Rachel Mercer - Cello, Vanessa Lee - Piano Cheers 
Eminent Technology ET-2 Tonearm Owners
Hi Slaw maybe this helps maybe not. Anyway - I have a Campbell Hausfeld compressor that I use with some air tools. Last winter it experienced the same symptom you described from the tube going from the tank to the pressure gauge. In my case it was... 
Eminent Technology ET-2 Tonearm Owners
Richard and Frogman thanks for the comments. BT in the damping trough manualYou can see visually small ripples on the surface of an LP as it is turning. These continuously excite the tonearm resonance.I am firmly in the camp of regardless what you... 
Eminent Technology ET-2 Tonearm Owners
Hi Richard regarding the damping trough location. Are you still using your trough ahead of the manifold on your custom ET2 ? My thoughts have changed on this. The trough paddle is attached to end bearing cap on the stock ET2 and ET2.5. The cap als... 
Eminent Technology ET-2 Tonearm Owners
A couple more opportunities for ET2's. One of the earliest ET2's available here. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380777927186&ssPageName=ADME:B:SS:CA:1120How do I know this ? Well it has no label / lettering on the manif... 
Eminent Technology ET-2 Tonearm Owners
and it can be taken away only over my dead body.Hi Harold - the last time I heard the words sir I was working :^( You are a gentleman sir. The stark reality of it for me is that I am a middle aged runner; and whenever I get a muscle pull, strain ... 
Eminent Technology ET-2 Tonearm Owners
Dlcockrum PS: I also have a nice stable of MMs: Empire 4000D/III, Signet TK-7LCa, Sonus Gold Blue, Micro Acoustics 530mp and 2002e, Astatic MF200, ADC XLM II Improved, and Shure V15 Type III MR. I read that some of you have liked the Empire with t... 
Eminent Technology ET-2 Tonearm Owners
Harold-not-the-barrel - The ET-2 is another very interesting tone arm though. Harold-not-the-barrel - my thoughts exactly over 10 years ago, and still today.Welcome to the thread. Is there a story behind your moniker ? Cheers Chris 
Eminent Technology ET-2 Tonearm Owners
On the base ET2 the end cap clearly overlaps the skinnier spindle.http://www.ebay.ca/itm/Eminent-Technology-2-Tonearm-/321252202495?ssPageName=ADME:B:WNA:CA:3160The overlap of the end cap on the spindle can be clearly seen in the second picture of... 
Eminent Technology ET-2 Tonearm Owners
The easy way to tell if you are looking at an ET2 versus a ET2.5 ? To be so obvious that it is over looked ? We need to draw our attention to the end cap holding the counterweight assembly. On the base ET2 the end cap clearly overlaps the skinni... 
Eminent Technology ET-2 Tonearm Owners
Welcome to the thread Banquo... touchee! Firstly - I am not certain of the answer myself (well it would be a guess) based on pictures themselves, especially when just one ET2 is shown. Frogman is able to tell the difference from pictures. I think ... 
Eminent Technology ET-2 Tonearm Owners
does another audio product exist - that in pictures is so easy to mistake I ask ? I guess I really meant to say "tonearm" instead of audio product :^) Skill testing question - this is for non ET2, ET2.5 owners only. Halcro? Nikola? DG ? Lew? Banqu... 
Eminent Technology ET-2 Tonearm Owners
Hi Frogman - it does look like an ET2 to me - but I took my reference from their website directly. Mikro Seiki RX-1500 FVG turntable with three arms and cartridges that were, SME V arm and Dynavector XV-1S Ruby, ET2.5 arm and Dynavector XV-1T, Zet... 
Eminent Technology ET-2 Tonearm Owners
from the Audiophile Club of Athens. A very interesting website with a lot of audio passion like here at Audiogon.I came across a recent visit with a member with an ET 2.5 on a Micro Seiki table. He also has an SME V and ZETA tonearm on the same ta... 
Eminent Technology ET-2 Tonearm Owners
Hi Dave - I am looking forward to your impressions of the ET 2.0 HP manifold. Cheers Chris