crom
Responses from crom
| Snell E type ll crossover rebuild thoughts Hi pkvintage,I have Snell E II’s and sent you a PM. Erik gave me guidance when I tackled the crossover. I would follow his advice and replace the capacitor bundle (should be 5.6uf) in series with the tweeter with a good quality film cap (Clarity C... | |
| Any experience with Sonus Faber Electa Amator II? I owned the Electa Amator II's with adjustable wood/iron stands for many years. I used them with an ARC tube integrated and I really enjoyed them. I ran mine single wired but replaced the metal jumper with Kimber Select silver jumper wires which I... | |
| Transparent or Nordost? Bjesien, I've got BH LS speaker cables and was thinking of moving up the Nordost line. Was told RD LS was a big step up. Now that the old Norse series is available at 50% off would you still go for RD LS or Heimdall/Frey? Differences between the t... | |
| Harbeth C7 Decoupling - Sound Anchor Blue Dot? Herbie's square fat dots. You can also buy sticky fat dots that are sticky on one or both sides. | |
| Harbeth C7 speaker grill You have to use a magnet to pull it out. You can purchase one from Skylan stands that is made to use on the Harbeth's. | |
| Speaker Cables for Harbeth P7ES-3 -where to start? I use Crimson Audio RM Musiclink with the 7es3's. They are within your budget and available for home trial. I agree with Drubin that it would be wise to try cables after deciding on your amplification. You can get some ideas from the Harbeth user ... | |
| What stands for Mag 3.6's work well? I own Mye Stands for my 1.7's. The stands are very well made and available in several finishes. FYI, Grant owns 3.6's. His website is www.myesound.com. As Magfan points out there is a fellow who mods Maggies and replaces mdf with hardwood. I have ... | |
| Magnepan 1.7 Magfan, you are not crazy. I mentioned the tweeter in position in another 1.7 thread. The recommendation is not in the owner's manual but was a seperate piece of pink paper entitled Magnepan 1.7 quick set up instructions which was stapled to bag c... | |
| Magnepan Owners - Need Your Thoughts Please Bifwynne, J Valin used a ARC VS-115 to drive 1.7's. | |
| Tweaking the Magnepan 1.7s There is a pink piece of paper entitled "Magneplanar 1.7 Quick Step-Up Instructions" (looks like typo and should be set-up) stapled along with Magneplanar Loudspeakers plates to the clear plastic that contains the 1.7 owners manual. The instructio... | |
| Tweaking the Magnepan 1.7s Mylar front, Tweeters in is Magnepan suggested placement on 1.7's. | |
| Tweaking the Magnepan 1.7s Utley, I don't have any experience with organ music. | |
| Tweaking the Magnepan 1.7s Utley, I am driving my 1.7's with an Audio Research SD135 amp. | |
| Tweaking the Magnepan 1.7s Ron, my 1.6's were black with cherry trim but I like the look of the aluminum trim better. Although it may just be cosmetic, I think the aluminum stiles add a little stability to keep the mdf from doing any flexing whereas the wood stiles are plai... | |
| Tweaking the Magnepan 1.7s My 1.7's are black with the black aluminum trim and can be seen on the Myesound website. The Mye stands provide more stability than stock stands. Bass is tighter and better defined. There is more clarity across the entire frequency spectrum with b... |