btselect

Responses from btselect

Which 6c33c-b tubes for BAT REX monoblocks ?
That's the sign that the tubes are not matched, all you have to do is to rematch the tubes, if the tubes are out of spec that will also cause the circuit to shut down making the tubes unusable.  The problem will be to get someone to match the tube... 
Leaky capacitors need replacement?
If it fits check Mouser part # 647-UCS2V330MHD, the difference in size is 16mm diameter versus 12.5mm, but the ripple current is 900mA versus 380mA for the UCY series. 
Total cost of ownership - how to reduce it
In general output tubes have the shortest lifespan, so changing to an amp with less tubes would cut your cost and maintenance time. Using fans should reduce temperature and greatly extend component life. The heart and soul of any component is its ... 
Has anyone heard avalons vs audio physic
I also heard the two speakers and I agree with Teajay and Ryder, but with the Nuforce amps I would go with the Indra. They are a more forgiving, a romantic sounding speaker as compared to any Audio Physic speaker, it's all about system matching. W... 
When to recap?
I would also recommend replacing all of the electrolytics, I replace them whenever newer and improved models become available, from my experience the difference is staggering. 
McIntosh C 2300 vs BAT VK-52SE/51SE
Greg,To do this job you would need a desoldering gun, I use a Hakko 808, for the money you can't go wrong. It took me years to master this tool, in fact I am still learning to use it. The best is to buy the kit that has almost all that you need, I... 
McIntosh C 2300 vs BAT VK-52SE/51SE
Greg,First off I would recommend that you stay with just one brand, in this case both manufacturers offer a complete line of products so you're lucky.I can only speak about the BAT gear so hear goes. To get the most out of their preamps that have ... 
6C33C-B tubes
Jedinite24,I got them from a small local dealer who got them from New Sensor, in the past whenever a group of us were in need of tubes we made a bulk purchase to get a lower price. I've haven't bought these tubes in a while, I have bought hundreds... 
6C33C-B tubes
Check the New Sensor site and click tube specs/FAQ, there are some great info here. I would recommend buying from a person who gets their matched tubes from them. I have BAT tube amps and get matched 6C33B tubes from New Sensor, I re-match the tub... 
Amp ventilation question
I group of us all bought an amplifier of Japanese origin, I was the only one that installed fans, and my unit lasted about 2-3 times longer than the rest of them before the caps failed. So I strongly recommend installing the fans for proper cooling. 
New KT150 tubes?
Xti16The tubes were right out of the box, it could be the input tubes you were using may not be a good match for the KT-120. I just heard the V110 today with the KT-150 tube, again the results were spectacular. We used the Gold Lion 12AT-7, but pr... 
New KT150 tubes?
Xri16 just heard the KT-150 the other day on a Octave RE-290, compared to the KT-120 is like comparing a Rolls Royce to a Toyota. Surpasses the KT-120 in every way. A more extended bandwidth with a blacker background, bigger and deeper soundstage,... 
I need help diagnosing a sibilant problem on vinyl
I agree with all the above, and also add if the turntable itself is properly level on all planes and on a solid platform, and do use a record clamp to better couple the record to the platter. Dougdeacon is it possible to get a list of those record... 
Dedicated Power Lines
Minorl,What is your take on the reason why you should put all your audio equipment on one leg and putting all your noisy devices on the other to avoid noise transfer. My understanding is a electrical device sucks electricity in and it's a one way ... 
Dedicated Power Lines
My recommendation comes from years of testing different electrical setups, wiring techniques, components etc., everything you have read here on audiogon I've tried and countless more. The key question here is what actually works, have you actually...