audiobob

Responses from audiobob

Technics SP-10mkII replacement screws?
Thats a great idea, thanks Franks 
Technics SP-10mkII replacement screws?
I found the service manuals only identify the screws by technics part # which of course are not in stock. 
Technics SP-10mkII replacement screws?
Checked KAB and found the 1200 series not the 10. 
3 Tonearms 1 preamp
never said it was high level or that I wanted to customize the sound. I guess that is why all of these items were purchased here.not good enough as they climded up. The Sp-10 mkll really adds to the flavor. 
3 Tonearms 1 preamp
Well to take the guessing out I will tell you I am using an ATP-12T with an AT-160LC , AN AT-1010 with a SIGNET TK7E and an EPA-100 with an AT-150MLX going to a UREI transcription preamp that has been custom modded by a shop here in town. Also use... 
3 Tonearms 1 preamp
Heyraz what you say makes good sense and that is what i've been doing. It creates problems with location of equipment to make it accessable and out of the way.Thought if it didn't sound good I could allways go back to cable swapping.I will try the... 
3 Tonearms 1 preamp
Thanks for the advice Heyraz. That will lead to the same problem at the final preamp. Maybe Veridian can comment on the results of his conversion with the addition of the selector switch. I am learning that most every change is a compromise in som... 
3 Tonearms 1 preamp
Thanks everyone. With my budget I think that the idea of adding a selector switch and phono jacks at the preamp is the way to go. I will get the switch and jacks from an old receiver. No real estate on the pre so I'll make a box that rests on top ... 
3 Tonearms 1 preamp
Good Point Veridian. This is the reason I posted the question. The problem is looked at from others and the solution is thought thru. I have one question though, how does a phono pre with multiple inputs arrive at this without switches, wires and ... 
3 Tonearms 1 preamp
Thanks everyone! The use of a passive preamp is interesting as well as installing a home made switch with rca jacks. It may end up I do one of these options.What I was hoping is to find a product that was designed to do exactly what I need. It see... 
3 Tonearms 1 preamp
Thanks CMALAK, I was hoping for something a little more affordable. I am also happy with the preamp I have. 
MC Upgrade for Pro-Ject Debut III
BTW mine is the 2.9 wood and the AT-33 PTG sounded very good 
MC Upgrade for Pro-Ject Debut III
I have an AT-33 ptg in the shop ( I hope ).I bought one direct from Japan thru the internet. A careless adjustment and the arm jumped out of the rest and the cartridge struck the corner edge of the platter. At that point the cantilever looked bent... 
Despriately looking for amp for Maggies 20.1
The EAD powermaster series are a very good match.The 1000 that I am using doesn't show any weakness at any volume(up to about 95db) and the sound quality is exceptional.I'm biamping with 4 of the 5 channels which adds to the overall performance bu... 
Cartridge / arm combination.How do you know?
Thanks for the info I've added a nickle to the headshell and rebalanced.Think I hear an improvement but not sure yet.If I come to the conclusion that this is an improvement I will reinstall the factory arm.