2. analog
  3. 1370121640

Micro Seiki TT problem

I just bought a DX-1000 TT from a steaming POS in Canada and it obviously has a big problem. It seems to run at only the 45RPM setting no matter which speed button is pressed. The strobe will line up with the top ring which has the more closely spaced bars on it, but the 33 RPM setting seems to be in the same speed range.

Any suggestsions or people to send it to for repairs?

Thanks
Marty
128x12816hzlover
mingles
791 posts
 
More than likely, it's the control unit. I don't have a recommendation for a repairman, but Vinylengine has the service manual. This should help a technician diagnose the problem.
genesis168's avatar
genesis168
409 posts
 
I've had a similar problem before. Strobe lines up but speed is way off. Pls download the service manual. I believe your strobe needs to be calibrated. You need a multimeter with a frequency range. There are test points inside the motor unit IIRC. Hope it helps.

Btw pls leave feedback for the seller.
16hzlover's avatar
16hzlover OP
16 posts
 
Well, I found out that you have to hit the stop button after every speed that you use, then turn the power off...turn power back on then select a new speed. Doesn't seem to work every time this way, but after a couple of tries, will get you in the right speed range. I'll have to find the manual first. Thanks for the input/suggestions.
More to discover