Correct amp for Dynaudio Audience 42?


I stupidly bought a pair of Dynaudio Audience 42s for $275 without thinking, let alone auditioning. Now I'm wondering if my decade old Marantz PM7000 (which claims to put out 155 watts with 4 ohm speakers) and SA8001 SACD player will actually get the best from these 150W 4 ohm speakers.

Anyone know?

If my amp comes up short, would I be better off waving goodbye to it and buying a new Marantz PM5004, even though it puts out fewer watts? (It seems like some amps with fewer watts are actually superior, but I don't understand why or how.)

My priority is to have an affordable compact system to play jazz greats, 70s funk records, and, occasionally, the melancholy MP3s of contemporary singer songwriters.

Thanks in advance for any help.

~Eric
emhans
Eric I haven't used these particular Dynaudio's but I have owned two different models in the past. They do need a good quality power source to really shine.

The watts doesn't determine the amps ability to drive speakers actually. It's the amps ability to provide the speakers a good current source. That doesn't mean a good quality amp can't have high wattage and high current. Actually some of the good ones provide both.

You may want to move into something outside the Marantz line. Their old tube gear was great and some of their old receivers have a good following but I think you could do better. Check the forums for amps to match the Dynaudio's and look at your budget. Good luck
Wow, thanks much, Detredwings.

I guess I just needed someone to say that Dynaudio's prefer to be driven by an amplifier with good power (measured in the unit "watts," right?) /and/ current (measured in the unit "amps").

I'd be happy to move beyond my blind allegiance to Marantz, and will first try to audition NAD amplifiers, which other Dynaudio listeners suggest makes an affordable pairing.

How do I know if the amplifiers I want to audition provide good current?

Everyone seems to talk about power (watts) and resistance (ohms) but never an amplifier's current (amps). Even reading howstuffworks.com I can't figure out how to determine an amplifier's current. I should have paid attention in school...
You won't actually look at the specifications for an amp and be able to determine it's ability to drive speakers that like power. From my experience it's trial and reading others comments. As well as the manufacturers reputation.

I used Krell, Bryston and Aaragon at different times to drive mine and they all worked well. NAD may be a good match as well. They are certainly more affordable. I put Adcom in the same class.

One thing I do look at is the ability to drive a 8 ohm load and a 4 ohm load. If the amp is rated at 100 watts into 8 ohms and 200 watts or close to it into 4 ohms. It has a power supply and be able to do the job you want. If it produces 100 watts into 8 ohms and 140 watts into 4 ohms I would personally not want that for speakers that need power.

This is just my experience and others may have different opinions. Hope this helps.
Eric, you did good purchasing the Audience 42. I agree with the others, look for good useable power. Investigate what others are using, for example I have a pair of Audience 50's which I drive with a Cary SLI 80 tube amp. Sounds good with plenty of left over power. Good luck