McCormack DNA 500 vs DNA 225 upgraded


I am looking for some feedback on comparing the stock DNA500 to a DNA225 upgraded by Steve McCormack. There were a few posts that only touched that subject. I am thinking about adding one of those amps to my system and relegating the HT5 to the surrrounds and center.

The DNA500 has amazing reviews, as the DNA225 upgraded also does. Is there a benefit to either one? I notice at this point there are no upgrades available on the SMC site for the 500. I imagine the cost for either is similar.

Thanks again for any help. This forum has been outstanding for me to learn from.
still_learning
Thanks for the input.

Heat could be an issue as the equipment is in a cabinet. I could add in a fan if I had to.

My current preamp is actually a digital processor, an Anthem D2 with Arc room correction. I am not sure how this would match impedance wise, (I am a complete novice at this area). Steve McCormack suggested that I also add in a preamp though.

As to matching either amp for sound quality the equipment I currently have is more digital at this point
McCormack HT5 amp (5 channel)
McCormack UDP1 universal disk (Deluxe)
Anthem D2 processor with Arc
Dennon DVD 3800 Bluray
B&W Nautilus N804 fronts, HT2 ctr, SCM surrounds
HD DTV receiver
Audioquest cabeling.
etc.

Thanks for any suggestions
Allow me to clarify things a bit.

Both the DNA-225 and DNA-500 are fine amplifiers in stock form. SMc Audio offers a variety of upgrade options above and beyond the stock versions for those audiophiles looking for even higher levels of performance. These upgrades are outlined on our website - www.SMcAudio.com.

Although the DNA-500 is not mentioned, I have developed an upgrade package for it and have done several. The owners have been very pleased. Please call for additional details if you are interested.

The input impedance of *all* stock McCormack amplifiers is 100K, except for the DNA-500 which is 10K. For DNA amps upgraded by SMc Audio to include balanced inputs or monoblock configuration, the input impedance is usually 10K (with a small number of amps configured for 40K).

Still_Learning, your Anthem D2 processor will drive any of these amps properly. As I outlined to you in an earlier e-mail, I suggest the addition of a good quality 2-channel preamp simply because I believe it will give you an overall improvement in sound quality. Any regular preamp can be used in a surround / home-theater setup, but this does add a minor (in my estimation) bit of complexity that you may or may not be comfortable with. I mention this because I took sound quality to be your main goal.

With a 10K input impedance, you do have to pay some attention to the output impedance characteristics of the preamp you choose. All solid-state preamps will work well, as will most tube preamps and TVC-type (transformer or autoformer-based) passive preamps. Tube preamps with an output impedance of 800 Ohms or less will work well.

The DNA-225 Platinum will outperform the DNA-500 in overall transparency, low-level resolution and detail, top-end extension, harmonic texture and richness, and toe-tapping musical engagement. Subtle dynamics and inflection are also rendered with greater clarity. The DNA-500 is obviously more powerful, and its sense of authority, bass weight and impact, and sense of ease in driving difficult speakers is world-class.

Neither the DNA-225 or the 500 gets particularly hot under normal use. The 500 runs a bit cooler at idle because it has a lot more heat sink area. The 225 gets rather warm, and if you locate it in a small enclosed space, you might need a small fan to keep the air circulating (but this is rare in practice). The 500 is considerably larger and heavier - check the specs for the details.

As mentioned by other posters, either amp will do a superb job for you.

Best regards,

Steve McCormack
SMc Audio
Steve,
Is there a balanced transformer upgrade for the DNA 750 as well, or is this a true balanced amp design?

Thanks for your feedback,
Stefan
Hi Stefan,

Like the DNA-500, the DNA-750 monoblocks are fully balanced with differential outputs. The input is transformer-coupled using the same circuit as the DNA-500. Input impedance is 10K.

Best regards,

Steve McCormack
SMc Audio