Hum/Buz fro JC1

Does any JC1'owners have this problem? Any recommendation and input to fix this problem is appreciated.

Thanks.

houstonreef12-27-2006 2:30pm

houstonreef OP Details Discussions Posts This discussion Message User 74 posts 12-29-2006 at 06:58pm Copy Comment URL Report Comment Edit Delete Downunder, i did the same thing with 3 prong female by disconnect the ground wire so which means that there is no ground feeding the amp.
audphile1 Details Discussions Posts This discussion Message User 4,347 posts 12-29-2006 at 11:28pm Copy Comment URL Report Comment Edit Delete it could also be that your rca jacks from preamp to amp are not seated all the way in the amplifier input jacks. If you are using locking type rca connectors, then you may want to make sure they're pushed all the way in. Some input jacks make it seem like they're in all the way, but in reality there's still room. Also, try connecting your cd player to the amp(but don't hit play) and see if that causes the same buzz as the preamp does. If not, your preamp is causing your problems.
brucemax Details Discussions Posts This discussion Message User 6 posts 01-23-2008 at 11:49pm Copy Comment URL Report Comment Edit Delete The best info I have seen about cheater plugs is not to use them. The shock from an ungrounded chassis can be lethal. If the interconnects are well made and properly seated, the next step would be to use a good quality power strip and plug all the units into it. Generally that should take care of the problem unless it is a real design flaw in one of the system items. Good luck.