Snell type B:any upgrades?

Zaikesman,

Agreed. The J and K were quite good. But the D had a stunning ability to disappear, which floats by boat!

Lneilb: You do crossover upgrades? As a part time business or hobby?

Let me ask you, what parts are upgradeable on these crossovers? Here is a link to the ones on my Salons: http://69.13.128.69/image_library/salon_circuit_lo.jpg

Paste it, tell me what you think.

I do crossover and electronics upgrades as a business. That's a great pic of your crossover, and it's nicely laid out, with SOME good parts. But there are at least 27 components that I have counted in that picture that could be upgraded. That would probably be overkill, but at least 12 of them would make a substantial improvement.

Actually you can get a much higher rez pic here: http://69.13.128.69/image_library/salon_circuit.jpg
(warning its a 4mb file)SO what are we talking to have them sent out?If I can improve on this investment I would like to. Email me if needed.

My original Snell B's also have the plastic binding posts. About 2 years ago I had the woofers die in one of my speakers. I couldn't afford to fork over the $300 or so per weighted woofer that Snell charged so went with the equivalent Vifa woofer that had the same mounting pattern. I moved the front woofer from the good speaker to the back of the bad one and then used both new drivers in the front.

While I was at it, I noticed that the caps used were pretty low-end. I tested them and found there was about a 12% difference in value between the left and right speakers. I ended up replacing them with slightly better caps (can't remember which but they were a few dollars each) that were matched to within 1%.

Long story short, the speakers sounded just fine after my "experiment" (bass was about the same but the mids were slightly clearer) Better caps will definitely help you get another few % of performance out of the speaker.

Best of luck.

Julian