Reterminating Nordost- worth it?

Southpark,

Does the Red Dawn have Bananas? (Nordost calls it Z plugs!) Also does the available binding post a 5 way binding post?(i.e accomodates bananas and spades at the same time)

If yes to both then, there is a solution to combine both at the speaker ends which does not have bi-wiring (2 sets of binding post)capabilities. What you can do is to buy a pair of Monster cable Spade connectors($19.95 a pair), opening it, you will see that the Z plugs will fit in the tube snugly(the body with the female thread of the connector). You can insert it in there, and then connect the spades. The plugs will not break. I tried it and it works.

There are a lot of different types of those spades, which ones are you referring to? do you have a precise model number (oh and yes your solution will work for me, thanks).
Here are the ones I have seen

type #1- (8 gauge)
http://shop.store.yahoo.com/beachaudio/pbs1-8h.html

Type #2 - (4 gauge)
http://r2.east.rmi.yahoo.com/rmi/http://www.abtelectronics.com/scripts/site/site_product.php3/rmivars%3ftarget=_top?id=11158

Type #3- (quick lock)
http://shop.store.yahoo.com/sweetronicsstore/monster-cable-qlgas-h.html

The easiest thing to do if you have a five way binding post in your speaker is the following:

Unscrew the post sufficiently to exposure the hole through the center of the post. Insert one of the z-plugs in this hole (they will fit) Then screw the post back down so that it is snug over that z-plug. Then insert the other z-plug into the hole hole atop the post.

This works just fine and is perfectly acceptable to do with z-plugs. It is better than using another connector to double up because those tend to degrade the signal and/or add capacitance. The nice thing about z-plugs vs. banans is that they can fit in both holes of a five way binding post...

Out of curiosity, are "Z Plugs" similar to the current connectors that Audioquest is marketing as a "banana plug" ? From what i can remember, they look pretty similar. Sean
>