I cant get my sub to work on my cal ssp 2500

I am not familiar with the ssp 2500,go to on screen display, go to speaker setup menu, check to see if the sub is set to [on or off].Most units have this feature for users who don`t use subs.Just a thought.

the sub IS set to on in the set up menu still no sub ???

Is the ssp2500 replacing a unit that you were using.? Or is this a first time hook up.What is your dit front end? Are you patching digital coax, or glass? Here`s a test,turn the volume control all the way down on your sub.Unplug the the sub patch cable from the SSP2500. Turn the volume control up just a little quarter turn,and holding the patch cable in your hand quickly thump the center pin of the patch cable with your index finger.If you don`t hear the woofer respond turn the volume up just a little more. Try again,do you here it now.If you do then we can assume the sub is ok.Please respond back after you try this.

THanks for trying to help I just figured out the problem I am using a cal cl2500 dvd player. I did just put the system together. The problem was inthe way I hooked the units together I was using the upsampled 96k output onthe dvd player and that does not send a signal to the sub. I used the coax output for 44-48 k to the processor and it seems to work just fine. I guess these thing can be a little tricky to figure out how to set up. I always laugh to myself when I read posts like these, now I see just how frustrating set up can be.

Combo audio / video with surround sound installations can have you pulling your hair out. Some of these installations give even the most knowledgeable and experienced "pro's" a few fits here and there. It's amazing how many different cables are involved with all of the various inputs, outputs and through-puts. Luckily, your problem wasn't that hard to solve. This time : ) Sean
>