2. cables
  3. 1247968778

Synergistic Research active shielding question

These are in a bedroom system and the bright blue LEDs are, well, bright! I was unplugging the MPCs at night (at the power conditioner, not at the cable) but have read that the cables don't like to be disturbed, even plugging and unplugging the MPCs and for max performance, leave them plugged in 24/7.

So I took a bit of electrical tape and wrapped where the LED is.

Does anyone see any issues with this? Will it affect the active shielding or the sound any? I'm new to these cables so I don't know.

In the last day they seem to have lost a lot of bass... but then last night I was at an outdoor concert so everything still sounds strange like there is cotton in my ears lol. (yes I know... should have worn earplugs!)
adhaney
rodman99999
6,023 posts
 
You can also dab some nail polish or enamel paint on the LED, to block the light.
rodman99999
6,023 posts
 
Gfroman- You might try contacting this seller: (http://www.audiogon.com/cgi-bin/cls.pl?powrcabl&1250953807&/Synergistic-Research-X2-Series), And see if he's still got one of the used MPCs that he mentioned. I've seen the MPCs on eBay, quite often.
adhaney OP
50 posts
 
Thanks guys.

I talked to Elliot at SR and he said that turning them off shouldn't be a problem but if I wanted to keep them plugged in all the time, electrical tape is fine.
hifi223
26 posts
 
Has anyone have heat issues on the SR cable near the LED with the MPC plug in?? My Precision Reference interconnect is heating up bad. I have measure at the MPC out-put, its actually have 34.4v, is this normal anyone?? But have no problem with my older designer reference at all...any help would be great..
More to discover