Von Schweikert VR-4JR Bi-Wire

Acoustic Zen will make one run a little longer for you if you went them.....however, I second the Herbies Big Fat Black Dots VS Special once you get your cable situation straighten out, just did it to mine a few weeks back and it was truely amazing what it did to for my sound.....

I had these same speakers and did in fact run the Analysis Plus sivlers biwire version. These cables start out as connected (all 2/4 cables) at the point that they connect to the amp but split immediately at this point so that you have no problem attaching these to the VR 4 JR.

Additionally, I found that with my other equipment at the time that the silver cables were a good match with the VS VR 4 JRs. Look for a pair of the Analysis Plus used and inquiry or request a pic from the seller.

Don't be afriad to NOT biwire the VR4JRs.

Some have reported excellent results with single run to upper module and then jumper down to the woofers.

This configuration, to me, can offer an improvement in the coherence of the overall presentation.

I currently use 'em this way but admit I do not obsess over this and don't do a lot of switching around anymore, so maybe there are gains I'm not extracting.

This question has been raised with respect to VS speakers regularly here. I have the VR5 and chose, for now, to use two runs of cable (Audio Art SC5, cheap, flexible and easy on the ears). I went this way as VSA stated rather bluntly that it was the best arrangement for their speakers. In terms of neatness, if you buy the cable long enough, the top run can dangle down behind the speaker and not dominate when lying in a pair across the floor (their combined size seems less visually intrusive than some of the mega-size cables one can buy. The Anti Cable would take this approach to the extreme, they are probably invisible from 10ft they are so thin.

But as others have noted, several companies make a biwire that is joined at the amp end and split apart early enough at the speaker end to span that 24" gap (Analysis Plus for one, which Albert used (uses?) in the speakers). As Mfsoa also noted, using a jumper to link the modules in conjunction with a good run from amp to speaker can work very well -- have a word with Moon Audio who will make such a run for you that they feel works very well with VSA. But in fact you can use any cable that can be made in 3ft pair.

FWIW, the Audio Art cable is cheap, well terminated and really good sounding. I suspect Rob who runs the company would make up a pair for you too if you asked.

Thanks to all for your useful feedback. I'm going to try giving Acoustic Zen a whirl. I had never heard of "Herbies Big Fat Black Dots" before this but now am anxious to incorporate them as well. Thanks again!