Why are there no high end cheater plugs?


Yes, I know there are safety reasons for not using such ground lifting devices; but as many audio magazines have suggested, the benefits from lifting all grounds except the preamp are quite substantial. But the 79 cent cheater plug covers much of the improvement. I made some cheater plugs using silver wire but Eagle plugs. They are better than the grey guys. Why does no one make a quality plug? I understand that at one time Siltech did make such a plug.

Please no "educate" me of the safety reasons for not using cheater plugs. I think the success that our immediate ancestors had in surviving two plug ac, suggest that chassis shorts must be quite rare.
tbg
Glad floating the preamp helped you, my system will not work with grounds connected, all I get is hum. Oddly enough the one time the system did not hum with grounded cords, the preamp was floated inside by design and the amps were Atma-Sphere MA2's which are also floated by the manufacturer during assembly.

I can't swear that's the situation this minute, but it's laughable to have a grounded cord on these pieces when they're disconnected inside. This falls into the same category of a single ended amp that sports XLR connectors. Quite often you open them up and there's a wire soldered from the XLR over to the RCA.

Truly balanced and truly grounded? Not :^).

The link you provided is interesting. That's the first I've heard of that product. It looks flimsy, not audiophile grade but looks can be deceiving.

I hope it does not sound like those surge suppressors that are supposed to help audio gear. All of them I've auditioned were terrible, even on very low amperage devices.
Albert, it is basically two diodes that only provide a ground at nearly one volt, below that there is no ground. As I would be using it, it would just provide safety, which so concerns some. It amounts to a cheater plug.
Hi,

There are adapters that will allow you to use a high end cable on a cheater plug or a cloverleaf plug. See dedicated audio website and click on adaptors.

www.dedicatedaudio.com.
Cyclonicman, can you please explain? I went to the website but could not find a "adaptor to allow the use of a high end cable on a cheater plug."
I know this is an old thread....But we all come to these questions, hurdles and possibilities at different times in our quest for audio "nirvana".....Most recently I came upon this "floating ground idea" Preconceived notions thrown aside..I tried Ground (lifting) from my digital chain using cheap crappy "Cheater's" ...Really weird with "big buck" "fat" aftermarket power-cords.... WELL....Moving as far away from my totally subjective emotional side...to my hopefully objectively logical and analytically skeptical side .....In my sound system ..the reproduced digital experience was hugely improved......
Overall clarity...deep micro detail.Overall definition and dynamics..scary!!! I really hear an amazing benefit...Having gone this far...(By the way after considerable back and forth..I left my pre-amp (grounded)the quality of sound lost nothing by this device remaining grounded..)
I am now in the process of fashioning better (CHEATERS)..
I'm using hospital grade males and females from Home Depot..
I think I can marry them and improve on the garbage level cheaters currently available....I'll keep you posted....
PS...This was only digital stuff at this point....Next..my beloved analogue....