2. cables
  3. 1150045541

Cable INteracion Question

I am trying a new set of cables, and when I insert them between the preamp and amp, I hear a ton of noise (sounds like the capacitors charging) in the amp at power up. When I revert back to my old cables I hear no such noise. What could be causing the "noise" in the new cables??
ehoehn
ehoehn OP
169 posts
 
Amp: Adcon GFA-5500 modified bt Stan Warren
Preamp: SAS 10-A
Old IC: Sonoran Desert Plateau
New IC: SAS V
nsgarch's avatar
nsgarch
2,524 posts
 
I'm sorry but I'm not that familiar with the SAS cables. Are they shielded (the Sonoran cables are). Try reversing the orientation of the SAS cables and see if that helps.
ehoehn OP
169 posts
 
The SAS cables are not shielded
nsgarch's avatar
nsgarch
2,524 posts
 
You might want to discuss this problem with someone at SAS, and inquire if the V cable is appropriate for the location in which you are using it. It may be meant for source to preamp applications.
tplavas
123 posts
 
It sounds like the SAS IC is a Kimber-style cable made with Jena Labs wire. Does the cable have a strong stress-relief at the connector? Perhaps the solder joint was damaged in shipping. I'm not sure if that Vampire connector will let you look inside easily or not.
Hmmm.
More to discover