Got NBS Omega I cables - Shunyata Hydra now ?


Hello,
I'm using powerchords, interconnect and speaker cables from NBS, model Omega I. I'm thinking of buying Shunyata's Hydra-8 and therefore I will have to buy another powerchord for the Hydra itself. What should this powerchord be ? NBS states that all the cables of a system should be, in my case, Omega I due to "synergy". Would that be a good match for the Hydra-8 ? Shunyata has got its own cables...and if I should use Shunyata's cable, which one would you recommend and why ?
Cheers and thank you
Mike

pro memoria : my system : speaker Avalon Opus Ceramique, Krell KAV-300iL, Cary 306/200
mikefi
Post removed 
Tvad, does this sound familiar? Mike, I was just referrencing a thread where we were talking about the same thing. Now that you are getting into treating your electric as a serious fundemental component in your system (which it is) I would, firstly, go with two dedicated lines to separate your digital and analog. This is an excellent start that will yield you tympanic tingles. I use a Hydra on my movie system, but prefer Audio Magic. If Hydra is the way you want to go, then get two of the smaller Hydras: one for each outlet. The ONLY way to truly isolate your digital from analog. You won't look back. Power cords (and it has been said) are personal and require experimentation. I wouldn't get nuts about outlet to Hydra power cords. Hydra to components should be the best you can afford. Especially to your digital. Happy listening warren :)
Hello Jafox, Tvad and Warrenh
thank you for your replies.
The main problem is that it is almost impossible for me to audition the Shunyata or NBS here in Switzerland ! There are no dealers, particularly for Shunyata. In other words, I would have to take a plunge and then either rejoice or regret my selection.
As for a dedicated AC line, I've got one for my system, but the CD player and SS amp. are sharing it (in other words, not ideal). On top of it, I've got a hifi fuse (copper) servicing this AC line and all plugs in my system are Furutech (rhodium). So, I've done quite a lot, but it is still a "halfway house". What I'm missing is power surge protection and, based on my one-time opportunity I had to audition an old Hydra-8 with Omega 0, a more "liquid" sound, I mean as relaxed as listening to music around midnight. But because we are talking of serious amount of money (around USD 3'500-4'000) I want to make sure I've got the best for this price point.
Finally, I was told that the Hydra-2 would not yield the same result as the Hydra-8, so it seems the Hydra-8 is the way to go, unless I take a different approach and get the PS Audio 500... tough call !

Cheers
Mike
Post removed 
Every manufacturer (my experience) recommends their own power cords (if they make them)for their power condtioner. Synergy? $$? Wouldn't you do the same? Hydra 2 and 8: same thing. Two outlet vs eight. I'd go with two Audio Magic (in your case 2 Hydras) to two dedicated lines. You're not even close to isolating those digital nasties from your amp. As far as the safest/judicious powercord route? I'd go with Tvad's advice and see how happy you are with your rig.