Automatic Turntables

From the same era, using the same technology, and according to some, designed by the same design team...

The JVC QL-Y series (5/7/55/66/77) - all have the electro mechanical servo damped arm, the later top models have magnetic bearing direct drive motors, and interchangeable arm tubes - so they can be low mass straight arms or mid-mass S-arms depending on the tube fitted.

I would not stress too much about the Ortofon Omega - the cartridge body itself is completely standard OM series, so by replacing the stylus you can upgraded it to an OM20/30/40.

Also the Omega is a surprisingly good cartridge, even if it doesn't get much respect from audiophiles... very much an undervalued cartridge. (it is effectively a rebadged OM5 I believe - and sold for less than the price of an OM5 stylus)

I particularly like the Denon, JVC, and Sony Biotracer electro mechanical arms, as the automatic function is achieved without gears/levers and doodads that can gum up or interfere with playback performance.
Also the servo damping really does work and makes them very very versatile, able to match up with a wide variety of cartridges, that might have resonance problems due to compliance/mass mismatches with a non damped arm.

Very highly recommended tables

Other interesting automatics:
Pioneer PL-L1000/1100, Yamaha PX1/2/3, Revox (this one is sort of automatic/semi-automatic), Mitsubishi LT20/30

The below models have auto lift at end of record and auto shut off. Auto return is NOT necessary as it adds a motor underneath the tonearm, just more things to break and resonate. All have really decent arms.

JVC QL-A7, same as QL-7 but with auto lift & shut off, detachable headshell.

Yamaha YP-D71, JVC coreless motor, detachable headshell.

Kenwood KD-770D, coreless motor, excellent tonearm with detachable headshell with offset angle on straight armwand.

Technics SL-M2, two versions: P-mount or detachable headshell(hard to find).

I also agree with Dlaloum from above.

______

Dlaloum,
Where can I find an interchangeable arm tube for my JVC QL-Y66F?

I recently obtained a Scott automatic TT on fleabay for really cheap (under $100.00). I got it because I have some Scott tube equipment and I thought it would be nice to round out the collection with another Scott product. I did not expect it to sound good. In fact, I was just going to put it on a shelf. One day I had nothing to do and for fun I put a Grado black cartridge on it and fired it up. I was very suprised by the sound. Very detailed, very clear and very easy to listen to. It compares quite well to my NAD533 which is a Rega P2 clone and sold for amost four times what I paid for the Scott. You may want to look into one.

Check out the 80's versions of the Technics tables. The SL-1300 MK2 was quartz locked speed controlled fully auto version(I have the SL-150 MK2, the fully manual armless version) or the SL-1400 MK2 semi automatic version.

You may be able to find these on EBay at resonable prices. They are pretty good TTs, even by today's standards. Although with any auto/semi-auto version you have to use the Technics arms.