What tonearm is recommended for the denon 103r

Without naming names, you'd want a tonearm with enough effective mass so that the arm/cart resonance occurs at around 10hz. Like 16g or more.

-Steve

What about a Graham 2.2?????

Hi Blueranger.
I've used the 2.2 with the Uwe bodied DL103R. It worked fine. However, when I added a headshell weight (7.5g) to the DL /Graham I liked the sound better. I also got my above noted arm/cart res to happen near 10hz this way with the Graham.

The Graham 2.2 is an impressive arm, imho. And it also helps that it is capable of so much adjustment....even to its mass.

Yet it seems like a mismatch. The DL-103 is beneath it.

At the moment I'm using a Zeta tonearm with the Uwe bodied DL103-R on a TD124 and feel this to be a fairly good match-up. Dynamic, slammy and surprisingly detailed.

-Steve

True, enough. I did use a 103r with a 2.2 for a while. The cart does play pretty well on the 2.2. I don't think I would agree that the problem was with the cartridge. IMO, some cartridges work better than others with a unipivot arm. I had a Vector at the same time and thought that the Vector did a much better job controlling the 103r.

According to the Cartridge/Tonearm data base, you will need a tone arm with an effective mass of 25 to 30 grams. The database list only two tonearms with that effective mass the Acros Lustre GST 801 and the Dynavector 501 tone arm. Although there may be others that will work which are not listed. Got to remember the Denon 103 series were for the most part broadcast cartridges, not really in the beginning intended for consumer use. There are other Denon 103 series such as the D and S models which have higher compliance that the 103 and 103R.