Anyone use a hockey puck as a record weight?


I was thinking about this after looking for Dallas Stars tickets...

A standard puck is one inch thick (25.4 mm), three inches in diameter (76.2 mm) and weighs between 5.5 and 6 ounces (156-170 g). However, a number of variations on the standard black, 6 oz (170 g) hockey puck exist.

One of the most common is a blue, 4 oz (113 g) puck that is used for training younger players who are not yet able to use a standard puck. Heavier 10 oz (283 g) training pucks, typically reddish pink or reddish orange in color, are also available for players looking to develop the strength of their shots or improve their stick handling skills. Players looking to increase wrist strength for better stickhandling often practice with steel pucks which weigh 2 lb (900 g).

(Thanks, Wikipedia, for the above information.)

I figure *someone* has drilled a hole in the center of one of these pucks and used them on a turntable.

Note - I did a quick search over at the Asylum, and this idea is not as original as I first thought. Thought I'd post it anyways.
128x128nrenter
I use a hockey stick as a record weight. I had to reposition the tonearm (and some of my furniture) and the cat has learned (the hard way) to keep his distance when I'm spinning an LP, but the overall effect and improvement have been great. Something about the momentum. I'm thinking about trying two sticks to kind of smooth out the table. And maybe a straight-line tone arm at a later date.
Why not. Find the exact center, stick on a drill press. The hole only needs to be deep enough to clear the spindle. Just make sure your TT allows a weight to be used. I have an LP12 and Linn does not recommend it.
I did it. Made me an experimental UFO-based record clamp by gluing a hockey puck to the bottom board. It's not a good thing sonically. Deadens the sound too much. Really take some of the life out of the LP. You can see it here:

http://www.enjoythemusic.com/magazine/equipment/0105/hagerman.htm

Fremer didn't like it either.

A chunk of brass will be much better. I think McMaster-Carr has some 3" blanks you can drill. The hard part is nailing the center.

jh
How heavy can a weight be? Does anyone know the heaviest weight one could use?