Dyscoveries on Dyna, Denon, Supex, Technics,FR,Ik


Dear friends: Over the time and testing/trying different cartridges ( " old " and new ones ) with different tonearms to find the " best " performance on each cartridge I find some interesting subjects that I want to share with all of you:

Denon 103: this is one of my oldest cartridges that I own and I use it for a while many years ago. In the last three years every time that I mounted and hear it I can't heard it for more than half hour, that's why I always treat it like a " rubbish cartridge " in my posts about. I try it with almost every single tonearm that I own and the result was always the same.
Then, I take in count that in all the tonearms ( removable and fixed headshell ) I can't tighten to much the headshell screws because the 103 is " open " ( input to output ) all the way where the screw goes and if I try to really tighten then the screw goes out of the cartridge body ( it is dificult to me this explanation because my English problems, I hope you can understand ).
I don't like to tailored the cartridge sound through tight ( more or less pressure ) the headshell screws, I always tighten the screws at " its limits " where IMHO and experiences there are less resonances/vibrations on it with better overall performances.
So, what to do?, it happen that I have an Audio Technica AT-LH18/OCC headshell ( headshell weight: 18grs. ) that has screwed holes underneath the headshell ( these holes are 2mm in deep, don't cross/pass the headshell ) in this manner I can tight the screws at maximum with out any trouble, well this was a great solution ( along with the weight of the headshell ) because I mounted the 103 in the Dynavector 505 ( similar to 507 ) and the performance change for the better like night and day, now I can hear the 103 for more than half an hour: very good improvement, this not means that now the 103 is at the XV-1/Myabi/etc performance level: no, but now the 103 has a decent performance that for its price is very good.

Dynavector XV-1: this one is one of my favorite cartridges, I really like it. It is a cartridge that almost always perform very good in almost any tonearm. Well I never be satisfied with " very good " performance I always look for excellent/exemplary performance.
I read some posts where XV-1 owners posted that this cartridge is a very good match with the Dynavector 505/507 tonearms and this was not my own experience about, it sounds good but nothing more.
I decide to try a little hard on the subject with: VTA/VTF/load impedance/etc,/etc with out any " great " results.
Then I decide to try with different headshells ( other than the original 507/505 ones ) till I find that with a light weight headshell ( Denon 100% magnesium, 6gr. The Dyna headshells weight: around 14-15 grs. ) the performance was/is glorious for say the least: I never heard ( any where ) better XV-1 performance that in this set-up.

Fidelity Research MC 702: this is a very " old " MC cartridge design. It is an integral headshell design, bulky one ( " ugly " ? ) at 30-32 grs, low compliance 6-7 Cu, low output 0.2mv and likes VTF 2-3grs.

I own this cartridge for at least 20 years and I buy it second hand in almost new/pristine condition. After many years I set up ( last December ) in my Micro Seiki MAX 282 tonearm ( it likes tonearms like: Ikeda, Dynavector, Audiocraft, SAEC, etc, etc ) and for the very first musical note I knew that this cartridge was something very special.
After 20 hours the sound performance was/is formidable/marvelous, I don't have words to describe my " surprise ", the best I can tell is that the music flow easily through this cartridge like in almost any other ( any where ) cartridge I heard.
If you " see " it ( second hand ) and if you have the right tonearm and phonolinepreamp then buy it!!!!!

Supex SDX 2200R: Another " old " MC design with screw open body type design ( like the 103 you need the right headshell ), ruby cantilever and low output 0.2mv. Man

I make the set-up on the Lustre GST 801 tonearm and sound was terrible at the begin, I have to wait 30 hours for the suspension settle down.
This was/is a great cartridge too, IMHO it competes with cartridges like the Universe ( are very similar in quality performance ) or any other today ones. Many people look for the Supex 900 series ( that I owned ) well the Supex Ruby beats easily those ones.

Audio Technica ATML 180 OCC: One of the greatest MM cartridges ever made.
This model ( I understand ) never sale in USA, the one that was on sale was the ATML 170 and 160 ( still very good ).

Till you hear a MM cartridge with the right phonolinepreamp you can't understand how good/great are the MM cartridges. During my last trip I was in San Diego and Norm heard in his system ( I think for the first time ) a MM cartridge the Empire EDR.9: he was happily surprised, he really likes the quality sound performance of this 100.00 dls MM cartridge.

Some MM cartridges like this one not only compete with any top MC cartridge out there but in some ways beat them, yes ( IMHO ) is better that any single Koetsu I heard it, that any ZYX or Lyra.
It is incredible that a 500.00 MM cartridge could be better performer than a 6-8K MC one.
This cartridge I mated with the Technics EPA 100MK2.

Technics 205CMK4: A marvelous MM cartridge. As good the Audio Technica is this one is better!!!!
What can I say about?, almost nothing but: Magic Diamond, Allaerts, Dynavector, Transfiguration, you named: the Technics is at least at the same level in any single sound performance parameter and beat almost all those MC cartridges for neutrality/natural tone balance, like I already say: marvelous cartridge!!!!!, if you have the tonearm and right phonolinepreamp then buy it!!!!
Mine is matched with the Micro Seiki MAX 282.

Ikeda 9REX: This one is a today MC cartridge with a unique design characteristic for a MC cartridge: it does not use cantilever ( like the cutter lhate/heads on the recording ), the design is with out cantilever. It is a very low output 0.16mv, weighty: 17grs, low compliance: 6CU and like VTF 2.8grs.

It is obvious that this cartridge is not for everyone, not only need the right tonearm and the very best phonolinepreamp out there but a lot of patience to obtain the best performance.
When you achieve this " best performance " you knowed because you will be in heaven.
The sound performance of this cartridge is a " little " different for all we know: the inmediacy of the sound and transients are second to none, the pitch/texture/no overhang/tight/fast bass is second to none, the high frequencies extension and speed are second to none, etc, etc.
You can't be near the live music like with this Ikeda cartridge: this one really is truer to the recording audio device!!!
You have to be a experienced music lover who attend very often to live events to understand what you are hearing through the Ikeda cartridge, you can't compare its sound performance with the sound performance of any other cartridge: it is not only the subject if it is better or not but the subject is that is different/near the live event.
It is an infamous bad traker: it does not like any single dust in the LP or in the stylus, we have to have everything in pristine condition. It takes more than 200 hours to hear it at its best. Like I told you: we need patience and know how.

Regards and enjoy the music.
Raul.
Ag insider logo xs@2xrauliruegas
Dear friends: Today I was " playing " around with capacitance range for the 750 LTD. In the specs manual you can read that the recomended capacitance is 150pf and at the HI FI NOVA web site: 350 pf.
Well, it does not work well with either ( at least in my system ), I'm finish with a 50-100pf range: I think I prefer 50pf .
This cartridge is very sensitive to changes in the capacitance value, well almost all MM cartridges are.

It will be interesting that you that have the EDR.9/205CMK3 could make some work about and could share with us your findings.

Regards and enjoy the music.
Raul.
Dear friends: +++++ " . First impressions are it is a different presentation style to the mc's; more up-front, easy to pick out individual instruments, full dynamic sound, soundstage concentrated towards the middle rather than the boundaries. Other impression is compared to my UNIverse the slam factor is more pronounced, articulation less analytical. " +++++

+++++ " Its had about 5 hours playing now, and im VERY impressed with it..quite blown away in fact. There's an aliveness and dynamism Ive not heard from my system before..brings out the perkiness and PRAt of the Lenco superbly...cant wait to see what it sounds like after another 20-30 hours!!! " +++++

+++++ " The EDR images wonderfully, but I would be pointing to a 16" square spot. Personally, I preferred the EDR's imaging because it struck me as more like my experience of live music. When I sit in a hall, I can hear the wonderful timbre of, say, a live violin, but with eyes closed I cannot point precisely to the sound hole -- the sound fills the room. So for imaging I preferred the EDR." +++++

+++++ " . The EDR produces weightier, fuller voices. And, again, these thicker voices struck me as sounding more like my experience of listening to live music... " +++++

+++++ " . I'm surprised how well the EDR9 does dynamics and I'm with you in preferring realistic imaging to "audiophile holographic." " +++++

+++++ " around 20 hours by now, the cart is starting to sing, so much so, that it now eclipses the Koetsu RS in performance. " +++++

+++++ " I just put an EDR9 on my Moerch (red dot)/Teres 265 into an Aqvox. Sounds great! Not as much bass as my Shelter 901, but the mids and highs sound just as smooth. That was with zero break-in, too. " +++++

+++++ " No, the EDR.9 did not outperform the Miyabi. In all of the parameters mentioned below the Miyabi was more refined and was at a higher level of performance quality overall. But the differences between them were not night and day and the EDR.9 VERY impressively held its own. It immediately called attention to itself with its terrific tonal balance with convincingly natural timbral presentation of instruments and voices. It had acceptable dynamics & articulation while also having relatively smooth presentation (see below for more details). It was resolving and had good image focus with convincing layering, depth and overall scale of soundstage " +++++

These are a few comments of people ( other than me ) that already try inexpensive MM cartridges and that share with us their findings about, all those opinions are on cartridges that were on storage 20 or more years and that not have more than 20 hours of broke-in: could you imagine how better could be its quality performance if those cartridges were " fresh "/today build ones?, WOW!!!!!!!!

One subject that I really attract to me is that ( till today ) no one speaks/report in a negative manner.

Many of you with great audio systems and specially with Rockport and Walker TT/tonearm could take advantage of those quality TT/tonearm performance to find a " new quality music sound reproduction world ". I'm sure that every one that try those cartridges will be not only " surprised " but well satisfied.

IMHO and for the people that cares about music it is a must to have those little/inexpensive " gems " before disappear/out of stock.

Regards and enjoy the music.
Raul.
Back then, good sound was available to everybody. Along came high end...

Ridculous, isn't it?

Now, how many dare get a KAB modded Technics 1200 turntable?

***
Dear friends: Maybe some could ask why I mentioned that these cartridges could be good match for Rockport/Walker TT, well for what I understand those tonearms are in between lo/mid effective mass and the Empire's like this kind of tonearms due to its high compliance.

Maybe, we could think that it could be " crazy " to try ( even to think ) those inexpensive cartridges with those very top high end and high price TT's. Well I'm almost sure that those " very modest " cartridges have nothing to be " on shame " with that analog rig and could have a very good quality performance.

Regards and enjoy the music.
Raul.