Joule Electra OPS-1 or 2 MkIII

Thanks for the responses. This is very informative. Let me share the rest of my set-up and then comment.

Cary V12i amp
Spendor 1/2e speakers
SOTA Nova TT
Kuzma Stogi tomearm
Benz M2 (M09) 0.8mV cartridge

With the Whest I have 220R plugs and 58db of gain in MC operation. With the Hagerman I'm using a step-up (Newcomb) that has binding posts where I can add resistors to set the load. The Hagerman is MM only at 47k. I have another 47k on the step-up and run this in 1:5 mode ending up with a 940k load.

One thing I have to mention is that I have serious RF here as I live near a radio tower. It was recommended by Jud that I use a step-up and that I could go through the dealer and order one that he would make for the OPS. I still need to talk to him about the configuration but if he recommends it then it must be fine.

Lgraef - Sounds like the Benz cartridges like the 1k setting. I do like the flexibility of the Hagerman set-up as it is easy to change resistors and settings. How easy is it to do this on the OPS? Plug and play or soldering?

Monk - My LA-100 has Sylvania 5751, not sure of the 6350, but Jud supplied it, and then I think the 0A2 and 6EM7 are Raytheon. I use Halos on all my tubes, usually set in top third of the tube. In the LA-100 I have them on the 5751 and 6350, but haven't ordered any for the others yet. I'm not sure I should based on your comments.

I thought the OPS came with the separate power supply as a standard and not an option. Also, the website says its a MkIII version so I guess a new version is out. I would also be interested in knowing what amps both of you are using. I am thinking of trying to find a used VZN-80 inthe future.

Thanks again for the responses.

I have the separate power supply as well.
In response to the loading question, there is no soldering-- you just plug in the resistors into RCA jacks located next to the phono inputs.

As for the Benz "liking" 1K, this was not true in my system, and Jud does not load down his Cardas Heart (makes me wonder if the OPS is "voiced" to favor 47K??)

I was not aware that there was a Mk4. Any word on the cost for an upgrade, Monk?

I have a LA 150 and OPS-1 MV, upgraded a couple of years ago from LA100 III and OPS-1 III respectively. Separate power supply for the phono stage. There is slight noise only detectable at very low levels in the high gain seting using a Benz Wood M2, but I still think it sounds fantastic. Source is Nottingham Spacedeck with OL-Silver arm.

Nelsjay,

I too was looking to upgrade to the LA-150 from the LA-100 MkIII. Jud informed me that they do not do this upgrade anymore due to reliability issues. Based on your post I imagine your unit is fine. How would you compare the LA-100 MkIII to the LA-150. I was somewhat skeptical about those Russian tubes, but if the price was right I would have probably done the upgrade.

As a matter of fact, just needed to have the LA150 repaired two years after the upgrade. Jud took care of me and it is now working fine again. Comparing the two (which is tough, because obviously can't do it side by side), I would say the LA 150 is more detailed and dynamic with greater extension at both ends, though may lose some of the lushness of the LA100.