2. speakers
  3. 1419439667

Tuning Rel G1

I just bought REL G1 Sub-woofer, which I connected with Krell S1500 Power Amp. I am using High Level Input with Synergistic Research Tungsten cable to connect. Speakers used are B&W 802D's. I went through REL manual 4 or 5 times, and followed the directions to set it right.
Problem is I tried crossover frequency from 32HZ to 40HZ, but I cannot have a volume opened more than 6 or 7. I spoke to several people and there recommended volume level is 14 or 15. If I set the volume level on sub-woofer to 14 or 15 my apartment shakes and base is extremely high.

Any advise?
trcns
mallen123
110 posts
 
set it by ear for your room vs levels recommended by other people. G1 is a huge sub designed for large spaces, so 6 or 7 in an apartment might be all you can turn it up to.
mallen123
110 posts
 
set it by ear for your room vs levels recommended by other people. G1 is a huge sub designed for large spaces, so 6 or 7 in an apartment might be all you can turn it up to.
wolf_garcia
6,631 posts
 
I agree with both of Mallen 123's comments. My Q150e runs at about 1/3 of the possible gain (based on the knob position) and I adjust it a little sometimes to fit whatever's playing...I stuck a "chicken head" knob on it for that express purpose.
More to discover