The best plug in filter ever!

I performed more tests over the weekend and was prepared to make an extension with a spare hubbel outlet i had.

Found i did not  have any spare outlet housings and swapped my other T-adaptor in a long shot.

What i found was that there was an unexpexcted difference between 2 identical T-adaptors. The one i previously used for testing sounded as if the volume was down 2 notches or so. The other T-adaptor immediatedly sounded louder. I was not anticipating any diffeence.

I am puzzled, but very happy now with the 4 Purons deployed and work very much exceeding my expectations that i have no desire to some more energy to swap better outlets.

I do, however stall find it will make a difference, i.e the different quality of oulets where the puron in inserted, together having a difference in sound, even with or without the T-adaptors.

Applied some Carbon contact enhancer to 1 puron and noted an immediate difference.

@justubes2  where's link to Carbon contact?

I like to try new things that work. 

Hi Nasaman, It was the Total contact by Perfect Path which i have some left, but no longer available.

How about just one (or two) of the inexpensive “solar generators” with 3600-7200 watt pure sine wave outputs? (Charges from wall, solar panels or both. Also configurable for either only 120v or split phase or just use the 15/20a outlets on the things)

Would also serve as normal power backup when power is out… unplug stereo and use power for required loads..

They are getting better and less expensive all the time. (And no permits/electricians required unless adding the home interface box for critical loads.)

Dual use, “clean” power, equivalent price in the end and no grid power used for audio.  Just an idea..

@nevada_matt 

anmd a very good idea at that...

Battery/Solar is good 

BUT is a Sine Wave the best way to send power... ;)

Thanks - Mark