Scheu Turntable Importer in US?

Thanks for the info.

Figured out what I was doing wrong:  I was using the wrong knob to control the speed.  The toggle goes from center to the left and right.  Putting the toggle to the right is 33RPM.  But the knob on the left controls the speed, not the one in the same direction as the toggle switch.

Weird.

I have a Das Laufwerk No2 and sounds like it has the same motor arrangement. Sounds like your switch has gotten turned 180 degrees. How big of a deal is this to you will decide if you want to open the motor up or not. It looks like there is just a nut on top that has to be removed to spin the switch, but I do not know that for certainty since I have no reason to have opened my motor up. But your table has its switch installed incorrectly. 

Got it.  Thanks.

How do you like your table?

@audiodwebe I own two turntables, the scheu and a SOTA Cosmos Eclipse. The Scheu is a very capable table, its a bit more "CD like" than the SOTA, where the later is a bit richer, dense, and full. The Scheu has two tone arms, a schroder CB-1L and a Dynavector DV505, and its nice it can support the two cartridges. I could easily live with either table as my only one, and I am fortunate to own both. I listen the Scheu the most because that is where my casual cartridge is mounted, but the SOTA gets the majority of the play on the weekend. I hope you enjoy your table because it is a fine one. 

I replaced the motor of my Premier with Teres's motor.