Upgrade capacitors in tube amplifier?


I have upgraded crossovers with very good results.  I now have a "very good" IMO chinese tube amplifier that can probably be improved with a couple of capacitor upgrades.  

I don't have a schematic, but I have a picture and I expect some of you knowledgeable folks can point me to/confirm the ones to change.  My thought is to change the two large silver ones first and then maybe the four smaller silver ones (on the circuit boards). 

Would probably replace with something like Jantzen Superior Z-Cap or comparable and go with a higher voltage if space permits.  

https://imgbox.com/rtBfoyg0

Thoughts?


chinook9
Hi chinook9. Think about Mundorf capacitors for the audio caps. Get the best ones you can afford. I've used them in at least 8 stereo amps and they have made a positively remarkable difference. I get them from Canadian outfit that ships very quickly. Getting the right physical fit for the big electrolytics will be the biggest problem. Happy replacing. There's nothing like the smell of a hot soldering iron in the morning!

@johnss I just wanted to thank you for your comments on the RFTLYS tube amplifiers.  I've owned a RFTLYS A5 for two years now and I have never had any problems with it and after replacing the stock tubes, I'm very happy with how it sounds.  Your the first person I've come across that had anything good to say about RFTLYS. Most people have never even heard of RFTLYS much less ever seen or heard one.  The A5 is very well built with three large transformers that is reflected in it's weight of 51 lbs.  What a horrible name though, I think RFTLYS would sell a lot more amps if they could come up with a catcher name than RFTLYS.

I don't think upgrading the capacitors is going to help much, as most of the music is not going through them.  But it will be interesting to find out how it ends up.  I would upgrade the tubes first.