Does Avalon speakers have a house sound?

I always just looked at their measurments and pasted on a demo. I like bass power/depth and they had less than I thought a 20k speaker should have.

http://www.stereophile.com/content/avalon-acoustics-indra-loudspeaker-measurements

Which amp, pre amp, source and cables did they use for the demo? Because this is very important also how deep the stage will be. I play now about 4-5 metres behind and even more than one metre beside. This makes the stage very big. Instruments and voices are very loose from eachother. I did many tests to hear how I can adapt the stage like I wanted it to be.

I am a classical music buff with a particular affinity for violin and piano. These instruments are the litmus test for any system audition. These are the most difficult instruments to get correct, and my system excels in both. The violin was the most difficult to get, but with proper components and cables, you can get close to the real thing. I have videos links on my system page to prove it.

I know a number of people who bought Avalons and sold them because they couldn't set them up correctly. They are certainly a tough nut to crack, and you will need to spend some time and money to make them work properly. I've had my days where I didn't think I'd get there. Audio is filled with enticing components which are really dead-ends towards achieving the proper tonal balance. Everything matters, including power and cabling.

Real music gives you a focus as it should sound. I am a perfectionist and good never will be good enough. Comparing and hearing gives you a lot of information how to deal with it. Many music lovers do not have the knowledge how it should be. Those who know how it should sound do not know how to get it with audio stuff. In 2005-2006 I visited many audiophile people with sets from 10.000 euro till 150.000 euro. Seldom there is a good balance between the equipment. They all make many misstakes and there often are not happy with there set. The main problem is that most cannot listen in a few seconds to all the parts you Judge a system for. They often focus on one part with which they are not happy. Wenn they solve this, often after some time there is a new issue. People often do not know the properties of cables, amps, speakers etc. This is what you have to learn to understand it. I work en think in properties. I use the properties of stuff to make those changements which are needed. Many audiophiles buy parts which are tested well. This doens't make any sense. Audio is al about making the right combinations. Wenn clients send an email with all there stuff I often see the misstakes they make. I send them an email back and try to explain why it wil not work. I always use the properties to explain why it causses problems.

Yeah they sound like a house!!