2. digital
  3. 177790-7401

Ethernet - Analog/Digital Signal Clean Up

Curiosity got the better of me recently and I tried a pretty cheap tweak where I used two Fiber Optic converters between the eero access point and my Lumin U1 Mini streamer. Converted from copper Ethernet to fiber optic then back to copper and then into streamer using my Supra Cat8. 

I was pleasantly surprised with the improvements this change had brought into my system and now I am wondering if I can do better. One other aspect of the current configuration that I don’t like is the clutter - each unit comes with it’s own power supply and add to that a fiber optic cable. I already have a spider web of wires and am not looking to add to that. 

Objective is to have as much noise, RFI and EMI removed before it reaches the streamer. 

Seeking opinions on the following units from those who had tried them in their systems:

  1. English Electric Network Switch 8 (Silent Angel is pretty much the same thing)
  2. Uptone EtherREGEN (currently out of stock)
  3. Network Acoustics Eno (box or streaming system)

 

What is your experience with these units?

Anything else to add to the above list? 

 

Thanks in advance!

128x128audphile1
toyman
40 posts
 
@gerrie
 
 
I ordered the DX Engineering DXE-ISO-PLUS-2 - DX Engineering ISO-PLUS Ethernet RF Filters to try

 

audiom3
142 posts
 

I am definitely in the camp of 'not-so-subtle' differences noted.  I started experimenting with FMCs early last year and the differences were so great, it inspired me to completely switch out my copper LAN for fiber.  I now have tons of boxes (LPS units, video streamers, etc) and a very complex media room.  But it's still whisper quiet.  Try the fiber/media converters on your video streamer(s)/TV.  It will probably surprise you.

rms456
40 posts
 

@toyman , let's know how they work in your system. The purpose of the two filters is that one blocks crud from the source, the other from induction along the cable.

Try to use non shielded cables in the chain, the sound was rough and hard compared to plain jane, so no need for expensive cables either as most of these are shielded. 

rikkipuu's avatar
rikkipuu
243 posts
 

I have the 8Switch and ER and a SOtM switch.

I have the 8Switch between the home router and ER (turned around) to moat the signal to the SOtM.  I found a SOtM dcbCat7u better between the SOtM switch and my streamer than the ENO Ag in the same position.

I was unhappy with fiber between the ER and SOtM.

lollipopguild's avatar
lollipopguild
125 posts
 

I'm currently playing about with all this - trying to get the best out of my Zenith Mk3.

I've tried the Sotm ISOCAT7, basic fibre setup and NA Eno.   Of the three the Eno is my favourite, though it's only a day old so hope to hear further improvement.  Like others, I felt the fibre option sounded dynamic and detailed yet brittle.  Impressive in the short term, but wearying to live with.

I'm happy where I am now with:

Netgear Orbi satellite (wifi backhaul)  =>  AQ carbon  =>  TP-Link 5-port switch with iFi iPower X  =>  Eno streaming system  =>  Zenith Mk3

So, unsure whether to sell off the Sotm.

Does anyone think I'll get any benefit from putting it between the Orbi and the TP-link switch, or perhaps between the switch and the Eno?

 

More to discover