A world class volume control for pennies on the dollar


In my role as a reviewer I have had five different DACs in-house for the auditioning process in the last six months. Two of them have analog volume controls ( Bricasti Design M3 / Rockna Wavelight) that negate the need for a preamplifier because their performance using their internal volume devices is excellent. However, the other DACs have no internal volume control and have to be used with some type of preamplifier. In what I refer to as my big system, my go to preamplifier is the terrific Coda Technologies 07x. In my smaller system I had sold off the line-stage I used to a friend who really wanted it for his system. So, the search was on for a high quality truly balanced preamplifier for a very reasonable amount of money.

In my search I came across a rave review on Six Moons from 2010 about the SPL (Sound Performance Lab) Volume 2 active totally balanced in/out XLR based volume control from Germany. SPL mainly designs and builds very high quality devices for the professional recording industry. The only piece aimed at the audiophile market is the Volume 2. This is a "hair shirt" design, one XLR input-one XLR output, no remote volume control, a mute button, large volume knob, and a on/off switch on the back (recommended that you leave it on for ever). It either comes in sliver or black, and retails for $450.

The DAC that was going into this system, the Mhdt Balanced Pagoda, really only shines if it is driven balanced and uses its XLR analog outputs into a balanced preamplifier. In the past I have had some of the finest transformer and resistor based passives, two different Shitt Audio preamps, LED based buffered designs and excellent tube based line-stages. Well, I saw that on US Audio Market, someone was selling a pristine condition SPL Volume 2 for $200. Hell, when I used to go out for dinner to a new joint, before the damn virus, I would often spend about that amount on dinner/drinks. Often, the food was not that good, but you don’t know unless you try. I could afford the loss, if the Volume 2 turned out to be a bust or just OK.

The SPL Volume 2 turned out to be a "killer" linestage/volume control. It adds "nothing" to the signal that’s feed to it. It is a pure conduit at passing on the upstream gear’s tonality/colors, dynamics, and spatial qualities. It has a vanishing noise floor, that allows micro-details to pop out to be easily heard. The volume control is not stepped, so you can easily deal-in the "sweet" spot for each musical selection. I got all this for $200 bucks! With the beautiful, musical Mhdt Balanced Pagoda into the Volume 2 controlling the dB levels, the system had the timbres/tonality of the NOS Western Electric 396 tubes and an over all liquidity/ease that this DAC produces was passed on intact by the SPL piece.

The SPL Volume 2 is my new "reference" for someone looking for a truly balanced design for less then a thousand dollars. So, if you run a balanced DAC without an internal volume control, want to spend a very small amount of money, $450, and not be bothered about not having a remote volume control, this well designed, German built piece might be a wonderful addition to your system.


teajay
Hey mitch2,

Here's some information that hopefully will be helpful to you;

1) The Volume2 does not use the VOLTAiR 120V technology found in the Elector preamplifier. I'll still stick with my statement that Volume2 offers tremendous performance for the money.  However, the Elector goes to another qualitatively level of performance across the board. As I stated in my Stereo Times review this preamplifier will compete with anything on the market and only retails for around $2000. 

2) I have tried the Elector with numerous Solid State and tube based amplifiers. With all of them the results were superlative. The descriptors I used in my review are taken to all the other none SPL amps by the Elector when inserted into my different systems.

3) If you just Email SPL regarding the specs you are seeking regarding gain, I'm sure they will get back to you quickly. Address it to Hermann, head engineer.
Post removed 

@teajay Knowing you’ve used the Elector with both tube and SS amps to great results is very good news to me. I’ve been searching for more reviews of the SPL Elector and haven’t seen a great deal. But have been assuming it’s excellent just the same and this confirms. I’m still, however, getting advice to mix/match tubes w/solid state, but keep coming back to the clean/quiet/dynamic/refined thing that the Elector seems to offer. I’m looking to drive a GoldNote PA-10.

Been using a SPL Vol 2 for couple months with my Audia Flight FL phono stage and I love it.