SME 30/2 Controller

I recall there being a specific Model 30/2 service bulletin for filling the suspension towers that you may request. Viscosity (CST) & amount (ML) of damping fluid are provided. Prefilled syringes are available from SME as well. The Model 30 variants do not use a dashpot as their fluid is in the base of each suspension tower. 
 

Regarding the motor controllers, with the exception of the new AC Motor Model 6, all of the controllers are interchangeable. The original rotary style controllers feature a linear power supply whereas a Switched Mode Supply is what is now being supplied.

I understand the factory is operating in COVID mode with limited staff. I believe contacting them through their website is best:

https://sme.co.uk/contact/

Hope this helps.

SME did contact me and I got it straightened out. 
 They do call the suspension system dash pots.  I have the fluid on order and a diagram for fill height. 
 The power/controllers are not being sold as upgrades. I guess I am using the original. 
 It was a stressful situation, in the end there was no damage and fluid was all that was needed. I did order suspension bands from 3rd party. They are close but I’m going to order another set that is a tad different.
  

I bought a 30/2, S/N 0244, from Audiogon in 2020 and it was not locked down for transit correctly, and the oil in the towers was everywhere on receipt. Good news was there was no real damage, just a mess.

Brian Laker at SME was very helpful, he sent me Service Sheet 54 and I got the original seller to cough up for 4 vials of the tower fluid. I stripped the deck down, filled up the towers as per the instructions, doing every thing very slowly and taking umpteen photos, just in case. I still have them if you need any help.

Once all back together and cleaned up, the deck was superb. its the yellow platter and knob-style supply, I too was interested in the newer push-button style but I think its pricey (4000USD?).

I have a V and Dynavector 20X2L, sounds great to me, am listening to Gary Numan as I type. Best record spinner I have owned by far (LP12, rega P9, SME 20/2, 20/3).

You asked about pricing. I paid 12500 for the 30/2 with V. I had been looking online for years, and that was the best/lowest price I ever saw. There’s two on Agon now, one at 16, one at 22 (a lot newer it has to be said).

If you are anywhere near Seattle, let me know.

Thanks for the info Tobermorey. I got the fluid ordered only a small amount leaked from 1 dash pot and the instruction for proper level of fill. My serial # is older but I have grey platter. 
 I am waiting on my Rosewood Sig to be rebuilt.  I hope it works with  SME V tonearm. It’s a low compliance cartridge and I have been told it’s not going to be a correct match. 
 

Platter color is if no significance.  The mat is exactly the same material.