2. amps-preamps
  3. 174291-170257

preamplifier after preamplifier?

Hi.

I have a preamplifier and a poweramplifier I am very satisfied with.
The preamplifier is connected to the poweramplifier and the powerampfiler is connected to speakers,
The connection between the pre- and power-amplifiler is also spited to two active subwoofers.

However, I miss the option to control my sub-woofers volume relative to the speaker volume.
My pre don't have any settings for tuning this, just volume +/-

Can I connect a Second pre-amp with independent volume before the sub-woofers? will this cause any damage or problems?
It might be easier to understand this drawing:


Pre #1: pro-ject pre box s2 digital
Pre #2: AIYIMA Tube Pre

flemmingss
bmontani
192 posts
 

I use the high level inputs on my Rel S5 Sho subs.  I have them connected directly to my amp outputs.  Works great.  I believe it is actually sonically better.  

bmendeloff
1 posts
 

on my SVS sub you can run speaker wire from the power amp speaker output to the sub and volume will be controlled by the preamp volume.  thety call it high level input on the sub.  

alfa100's avatar
alfa100
216 posts
 

Not possible because the first preamp output will be too high like firca power amp and not for a preamp.    The second preamp will need a low output like from a source example Phonostage ,CD PLAYER or DAC . unless the first preamp has a source direct out.  

alfa100's avatar
alfa100
216 posts
 

Correction to above entry.   Firca should read for a   Power amp

joenies's avatar
joenies
258 posts
 

Do you have a tape out on preamp 1? If so use that to drive preamp 2. Then use preamp 2 for volume control for subs. There are a few postings about this type of hookup.

This is the hookup I use for controlling my passive suds. Tape out to preamp 2, then to my external crossover, then to DSP for subs only. then to dedicate power amp for subs.

More to discover