2. speakers
  3. 1343902451

REL B3 connecting to Linn Klimax Solo help...

Hi All,

I cannot get any output using a 20hz tone on my demo REL B3. Its connected to the High Level unbalanced input with the earth going to my Source ground plug and the RED wire to my Right Positive Monoblock and the Left wure to my Left Positive Monoblock

The amplifiers are Linns Klimax Solo 500. Can anyone assist in determing the right way to connect this in a 2channel system only?

My Linn pre, source and monoblocks all used balanced cables.

Thanks
128x128dastrix
dastrix's avatar
dastrix OP
49 posts
 
Update on this.

The cable is still making its way to me... but the repairer has found the driver is faulty. The magnet had dislodged itself from the unit... Thats what was making the horrible noise.

A replacement driver is funnily enough, in stock..
dastrix's avatar
dastrix OP
49 posts
 
Soldered a RCA onto the Black wire as per your suggestion Almarg and the driver was replaced. All working nicely now ;) Thanks!!
dastrix's avatar
dastrix OP
49 posts
 
Hi Guys,

Having another issue after moving house.

Speakon in the unbalanced connector, unit turns on, but no audible thump when its on and no signal via the RCA or Speakon cables...

Very odd. No dials changed in the move, packed and moved very carefully.

Blue power light comes on...

Any ideas?
More to discover