2. amps-preamps
  3. 170054-165146

Is it possible to connect Lumin x1 to Hegel H390?

Is it possible to connect a hegel h390 to a lumin x1

The reason being that the lumins' dac is much better and the steaming capabilities are much better as well (plus i enjoy the fiber connection to the lumin)
The owners manual says coax to dac and xlr from external dac to hegel.

The problem is, the lumin doesnt have digital inputs (besides usb). Why would i need to coax into the lumin? why would the hegel need to send a signal to the lumin at all? Perhaps they are assuming you are connecting to an external dac only and not a dac/streamer

why cant i just xlr out into the hegel? perhaps i dont understand. I just want to use the hegel as an amp/pre only

"This function makes it possible to upgrade the digital inputs of the H390 with an external high-end DAC. This is done by conecting the re-clocked coaxial digital output of the H390 to the external DAC. The output of the external DAC will need to be connected to the XLR input of the H390"
questforhifi
fuzztone's avatar
fuzztone
5,508 posts
 
I give up. 
Why not?

djohnson54
396 posts
 
I guess some people just can't bring themselves to be helpful.  It's easier to make inane comments.

Those instructions are for bypassing the Hegel's internal DAC and using an external DAC instead.  In your case the Hegal will not be sending anything to the X1.  Instead, just connect the X1 to one of the Hegal's inputs and stream from the X1 like I assume you're doing now (Qobuz/Tidal over your network?) and enjoy the superior DAC in the X1.  I can't remember if the X1 has RCA and XLR or just XLR outputs (my T2 has both) but XLR is preferred.  You can use the volume control on the Hegal or just set it at a comfortable level and use the Leed volume control on the X1.
tom6897's avatar
tom6897
1,484 posts
 
That was easy🙃
atanarjuat99's avatar
atanarjuat99
51 posts
 

Hi guys, I have a Lumin T2 and Hegel H390. I have connected them via XLR. However, even when streaming MQA 96 kHz files through Roon, the LED screen on the Hegel says 44.1 KHz. The Lumin signal path shows MQA 96. Is this what other people have experienced? Does it mean that the MQA unfolding in the Lumin is not being transmitted to the Hegel? Thanks for any help! Nadine

More to discover