@cycle2: Brian, What Gryphon told me was physically separate the power supply from the pre, separate shelf. I always attempt to place my gear on individual circuits. I will not be able to do this when the Pandora/Power Supply Arrives. If the Pandora and Power Supply are on the same circuit I doubt if that diminishes anything. Hope this helps...John
Gryphon Mephisto
Here is an update with my Gryphon Mephisto: Connectivity was directly from my EMM LABS DV2. After some time I found it too edgy and forward. Lowering the gain on the DV2 helped, but still not to my liking. Couldn't find a Pandora anywhere. I called John at Audio Salon, (Great guy to Do business with) never had any dealings with him before. He had a Zena. I figured the Zena would give me a pretty good sonic presentation as to what to expect from the Pandora. Sure enough I knew in the first 5 minutes. Fantastic presentation, its a very good preamp. Separate PS with the Pandora, dual AC power, will only make things better. I ordered a new Pandora. Gryphon is making one. If anyone is interested in a Zena PM me. Only thing is the Pandora will take 2-3 weeks. I'll update this after the Pandora arrives. My room is huge 30 X 26 X 26H. Big A-Frame. This creates denominators that are not typical.
- ...
- 44 posts total
“When Gryphon says to place the Pandora power supply separate from the Pandora pre-amp, did they mean to place the pre on a different dedicated electrical circuit than the power supply? “ What? How is this even possible when the preamp chassis lacks IEC and designed to receive power through DC umbilical cords from its own custom designed separate power supply? A query like this makes one wonder if they actually own the component 😊 |
Lalitk, is correct. I should have phrased my response with a little more thought. Actually a lot more thought! I thought what cycle2 meant was splitting the AC power from the PS to separate circuits. What I should have stated is I doubt if running the power supply from the same circuit would diminish anything. I run the Mephisto from 2 separate circuits. As Lalitk said, it would be difficult to run power from the Pandora Pre as there is NO IEC! Sorry for the confusing post...John |
@jakesnak, Thanks for the further clarification. BTW, I did not find anything confusing about your original post, “ I have spoken with Gryphon a few times, they made it very clear as to place the power supply separate from the Pandora Pre.” I have not seen a bespoke approach like the one in Pandora. It’s actually a four chassis design in two chassis. Both chassis are designed with total isolation of left and right channels in one separate chassis and dedicated dual mono power supplies in 2nd chassis to protect the audio signal from any interference. Hope you got two power cords ready for Pandora just like your Mephisto :-) You’re in for a major treat and substantial upgrade over Zena! |
Am curious to hear about your experience with your Pandora. Owning a pair of Tannoy Westminster GR and a Mephisto, I tested a few combinations, including Zena vs EmmLabs DV2. I ended up with EmmLabs DA2V2 (DAC) + EmmLabs Preference Preamplifier. I am extremely satisfied with that combination(DA2V2 (DAC) + EmmLabs Preference Preamplifier). For more info and pictures, see Frederic Oudin's post on Facebook dated October 15 ( https://www.facebook.com/FredericOudinAudio/ ) Keep me posted please.
|
- 44 posts total