TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?


Dear friends: This tonearm critical subject sometimes can be controversial for say the least. Some audiophiles swear for non damped tonearms as the FR designs or SAEC or even the SME 3012 that is not very well damped in stock original status.

Some other audiophiles likes good damped tonearms.


In other thread a gentleman posted:


"  If a cartridge is properly matched to the tonearm damping is not required. " and even explained all what we know about the ideal resonance frequency range between tonearm and cartridge ( 8hz to 12hz. ). He refered to this when said: " properly matched to the tonearm ".


In that same thread that a Triplanar tonearm owner posted:


" This is the one thing about the Triplanar that I don't like. I never use the damping trough...... I imagine someone might have a use for it; I removed the troughs on my Triplanars; its nice to imagine that it sounds better for doing so. "


At the other side here it's a very well damped tonearm:


https://audiotraveler.wordpress.com/tag/townshend/


Now, after the LP is in the spining TT platter ( everything the same, including well matched cartridge/tonearm.  ) the must critical issue is what happens once the cartridge stylus tip hits/track the LP grooves modulations.

The ideal is that those groove modulations can pass to the cartridge motor with out any additional kind of developed resonances/vibrations and that the transducer makes its job mantaining the delicated and sensible signal integrity that comes in those recorded groove modulations.

 That is the ideal and could be utopic because all over the process/trip of the cartridge signal between the stylus tip ride and the output at the tonearm cable the signal suffers degradation (  resonances/vibrations/feedback ) mainly developed through all that " long trip " .


So, DAMPING IS NEED IT AT THE TONEARM/HEADSHELL SIDE OR NOT?


I'm trying to find out the " true " about and not looking if what we like it or not like it is rigth or not but what should be about and why of that " should be ".


I invite all of you analog lovers audiophiles to share your points of view in this critical analog audio subject. WHAT DO YOU THINK ABOUT?


Thank's in advance.



Regards and enjoy the MUSIC NOT DISTORTIONS,
R.






Ag insider logo xs@2xrauliruegas
Townsend sells I think it was 4 different viscosities from 10,000 cst to 600,000 cst. The 600,000 is for unipivot arms. Using that in a damping trough will rip your cantilever off:)
The one they call "trough fuel" i have been using, probably has a good viscosity for Townshend type trough ! I ordered larger bottles with viscosity 10,000,100,000 and 300 000 cst from a different vendor. A little experimentation will be interesting.
Dear @kps25sc : "  A little experimentation will be interesting. "

Absolutely and a must to do it.

Btw, @bdp24  , have you any idea of the viscosity in the silicon that you are using in the Townshend?

R.
Unfortunatelly audio analog is not really a science and do not exist inviolable rules.
I don't find this to be true, nor do I worry about being a minority in this regard. There's a lot of 'by gosh and by golly' in this hobby.