2. speakers
  3. 137322-89000

Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions

I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
jcarcopo's avatar
jcarcopo OP
501 posts
 
@sid-hoff-frenchman The Pass Lab engineer told me it was normal considering that deep bass uses 80% of the power of your amp. Sudden transients demand a lot of momentary current. My amp caps out at 10 amps current delivery. That isn't to say the impedance doesn't dip lower as this may very well be the case, but the engineer I talked to said I shouldn't be concerned and said the amp was operating normally considering the source and average load. I don't think it's impedance related because I did try an autoformer on the Encores set to 2x to raise the average impedance of the speaker to 8ohm, but this didn't prevent clipping and I lost like 3db of max volume before the protection circuit kicked in as expected due to the fact that at 8ohms my amp was only delivering half the wattage. 
jsoku
12 posts
 
sid-hoff-frenchman
Thanks for updating us that the Encores work well with the Aegirs in monoblock mode.  That's good to know.  Are you satisfied with the sound or do you have any pangs of amp-upgrade-itis yet?
Can I ask when you received your Encores?  I think you said that you placed your order about 2 weeks after I did, so hopefully that means mine will soon be on their way to me.
sid-hoff-frenchman
50 posts
 
@jsoku I ordered them on 7/21 and received them on 8/21. I got lucky with the speed. I hadn't expected them for at least another month, if not two or three. Maybe they got a cancellation for charcoal Encores and I was next on the list with those specs. Who knows...I'm not complaining though! What color did you choose?

The Freya + & Aegirs give a great sound for sure. I am going to give the Don Sachs pre-amp/amp combo a try, just to compare. I've only ever had Schiit gear and am curious to hear how the highly recommended Sachs gear compares.
jsoku
12 posts
 
Is charcoal black or dark grey?  I ordered just basic black on 6/27.  Oh well.
Did yours come ported or not ported?


sid-hoff-frenchman
50 posts
 
Charcoal is dark gray. Mine are the newly redesigned front port-less Encores. Eric said he made the change recently for all Encores going forward. They still have the standard rear ports though. Since you ordered before me then I would guess that someone ordered dark gray Encores which got built and then they backed out.
More to discover