Behringer DEQ2496 - worth using in hi-end system?


I am considering trying it in a digital chain. I want to correct for room and any system internal dependencies. I am tired of using cables as tone controls, there has to be something better to make those minimal changes.

I am looking for opinions and short system desriptions.
spraglow
Street, Yes you can put it there, but you would be taking your CDP's DACs out of a meaningful role, because the DEQ2496 is a digital equalizer, not an analog equalizer. The DEQ would convert the analog signal from your CDP to a digital signal, perform the equalization operations, and then convert the equalized digital signal back to analog and send it on to your integrated. The critical D-to-A function would be performed by the DEQ, not your CDP.
Thanks. I have a well regarded exempler 2900. Are the dacs in the behringer comparable? Does the quality of the cd player still have a significant role? I would hate it if i wasted the $$$ on a cd player if it wasn't fully utilized!
I am only using the digital functions of the DEQ, so I don't know how its DAC performs. I also don't know how the DAC in your Exemplar performs. However, a lot of what you paid for the Exemplar went into providing a nice, tube analog output section after the DAC. If you used the DEQ to provide digital equalization and output an analog signal to your integrated, you'd bypass all that. You probably wouldn't be using most of what makes the Exemplar more than the Denon 2900. Unfortunately, it seems like going with the DEQ may not be very compatible with taking advantage of the Exemplar's strengths.
If you use the digital out, your CDP will have no significant role. If you go the A/D - EQ - D/A route, you CDP will still have a significant role but may be hampered by the conversions.

I think many people want to know how exactly the A/D and D/A conversions degrade the sound. Please share your experience you do give it try.
Streetdaddy...If you want to use the Behringer for all sources (not just CDs) you would put it in the Tape loop of your preamp. When you do this you can switch it in and out of the signal path and decide for yourself if there is any degradation in sonic quality, and if there is, does the room correction done by the Behringer more than make up for it.

If you only listen to CDs, feed the Behringer a digital signal from the CDP. The Behringer D/A are also "well regarded". But only your opinion matters.