Very bright SC and IC with coherence in imaging, soundstaging and timing


I have a new speaker with a 2“ BMR driver that handles everything from 250hz to 20khz. Naturally it can’t produce high frequencies as present as the mids. It needs +3db from 10khz on. No, I don’t want to look for a new speaker because I love for all other qualities.

Is there a speaker cable / interconnect that brings more treble energy yet still does not mess with timing (coherent speed), imaging, fullness and soundstaging ?

Up to 500 usd used, 8-10ft, black or clear color, round cables (no ribbons), sturdy, no boutique manufacturers, no diy. I usually prefer solid core over litz cables.

For 40w tube amp power

Thank you!
128x128zuio
Lots of requirements, lots of limitations, fighting physics, not much $. Bad combo. If you specify your amp, source, and tubes and wires you’re currently using it would help significantly in generating more useful recommendations here. Taking a shot in the dark on wires, maybe look at DH Labs Q10 cable and Silver Pulse interconnect — silver-plated copper might be your best compromise at this price level. Best of luck.
I have a couple pairs of Amadi Maddie Signature silver wire ICs and a couple pairs of Darwin Silver or Ascension silver wire ICs that are both very detailed, open, will light up the sound a little but with no harshness.  They are significantly better sounding than good cables such as Morrow MA-3 or 4, Crimson, mid priced Audioquest--have had all of them and some others.  Magnan, DNM, etc.   Am currently using Teo GC II doubles with the Schroeder Method and JW Reference doubles with the SM in my best system.  They make a great combination with my system.  

Bob
Just out of curiosity, does it have a dip in the frequency response at about 2Khz?

I am surprised the designer used that driver and didn't accommodate for it in the crossover. I would be interested in what the bass driver is that is being used with it?

If you ever get to hear a speaker with the SEAS Exotic T35 X3-06 I think you might like it. It won't go quite as low as the BMR, but it's exceptional for a tweeter that is regarded as possibly one of the very best. 1500hz to 25000hz