Is it all in my head??


So I bought a Kimber Power Kord...  yeah, yeah, but it looks prettier than stock, is well built, and having built all my cables myself I appreciated the craftsmanship.

...so, I'm playing an Everest LP--symphony stuff.. and it always sounded noisy and muffled (which is why i decided to give it a spin).  The power cable is plugged into my furman conditioner, and all the other cables are the same.  I swear this LP sounds more "untangled" now (that's the best way i can describe it).

I am an engineer and know intellectually this makes zero sense--is it some confirmation bias?  How can it be.. i didnt buy it expecting a sonic impact, i bought it because i couldn't make one that looks as cool (think of it as a necklace for my rig).  But I swear I think i hear a difference...  tell me it's all in my head.
waltertexas
Infinitely better than trying to cook them into compliance!

That is to say that, IME, most wires that have Very little or no insulation, do not seem to require any break in at all...with the possible exception of silver conductors, which I don't work with much anymore, since I've come to realize I generally prefer copper.
This is, so far, the most reasonable and polite OP that I have seen on topic of cords/cables. Now, if the thread could remain that way...
Personally, I would really appreciate someone pointing me to some sources of sound, scientific information about what factors make up a true, audiophile grade interconnect and which characteristics tend to enhance clarity, treble, bass speed, etc.  I cannot afford trying 20 different types. But, I can distinguish sound quality differences among the various types I already have.  I just don’t fully understand why those differences exist beyond guage and shielding quality.
I have this theory on "cooking" cables too... I think what is happening might be a combination of oxidation and 'listening experience'.  I have a pair of speaker cables I made that are braided/twisted and when terminated are 9AWG equivalent.  I did an internal bi-wire pair so 6AWG essentially.  When I hooked them up, I was shocked at how bad they sounded compared to the non bi-wire cables i replaced (both made from the same 12-awg stock)... but after listening to them for a week, they started to sound better and more detailed (because 8 wires to each speaker are way better than 4 right?!).  Did they sound better? probably not and i kinda' think they still sound worse now that i think about it.  maybe that too is all in my head...
@kumakahn Exactly...unfortunately for us all, there Are no sources of sound, scientific information that relate to sound characteristics like the ones you mention. That sort of thing, AFAIK, is not to be found in science, per se, but only in marketing...hence we rank ametures are having to try to do it all ourselves, basically.

In the early 2000’s I got into it because of the raging debate at the time of which was better, stranded or solid core...I mean about half the manufacturers were saying that stranded was clearly the "greatest" and the other half said solid core - the only thing I knew for sure is that they couldn’t both be right. That’s when I started experimenting myself, however crudely, it didn’t matter to me, with some orphaned wires I had accumulated. The materials used have an impact. Online I looked at topics like dielectric absorption, which was helpful, but drew no correlation between that and sound quality, per se...only measurements, mostly. But, the experimenting taught me more about what relates to sound quality than anything else. It’s just that I had to carry out repeated experiments over time, a few years in fact for me, in order to be sure I was not inferring something that wasn’t there. Even so, I don’t have any scientific "proof" of what I hear, and yet it’s demonstrable all the same.