Accuphase Vs Parasound

@erik_squires - that's interesting that they would say that.  Based on pictures, it doesn't look like the preamp boards in the new HINT 6 are any different that what is placed in the normal P5/P6.  I suppose the preamp section would be better because it's fed by a linear power supply from that big transformer instead of the normal switching power supply in the P5/P6, unless Parasound decided to move to linear power supply on the P6.  There is additional circuits for the resistor-ladder volume control, of course.  However, the P6 weight is exactly the same as P5 weight, so I find it unlikely.
----
The Zdac also has a full linear power supply, so it also makes sense that it would sound good, and probably better than the DAC/preamp in the P5/P6.

This is the response I got from parasound on the preamp

"the P6 and the HINT 6 preamp sections are the same. As you recall, this was not the case with the P5 and the Halo INTegrated." 

at 85 db efficiency, you shouldn't consider any amplifier less than 100 watts into 8 ohms. You should also look at the impedance curve of your speakers and ask how well the amplifier performs at the lowest impedance of the speaker. The Anthem STR integrated amp is quite compelling at $4500, especially with its built in room correction capability for bass. The negative of course is if you already have a good preamp... the room correction option requires you to use their preamp section
https://www.anthemav.com/products-current/model=str-integrated-amplifier/page=overview

Hey guys! Thanks for all the feedback. 

I'm now deciding between:

A) Parasound Hint 6 or Parasound P6 pre and perhaps A21 / A21+

B) Naim DAC + Naim NAC 282 + NAP 250.2 (used)

Do share your thoughts on the differences between these 2 set ups. Much appreciated. 

Thanks! 

dont forget about luxman