Velodyne Digital Drive Series subwoofer in stereo

Thanks Sailfishben,

I was going to buy a Velodyne DD10 for my bedroom and then add another one when I move to my new apartment, but I found a really good bargain for DD15 and ended up ordering that... I'll update my system as soon as the subwoofer arrives.

GREAT... so glad you obtain the 15" driver. Simple math tells you it's 50 percent larger, which as Yogi would say, is a lot! Anyway if you stumble on the set up, e-mail me. I'm no installer but... Enjoy!

The DD15 will be here any day now.

Sailfishben, as far as math goes, you should focus on the surface area instead of the length. The 15" driver has over double the surface area of the 10" driver. Actually more than 2.5 times as much considering the DD15 has 12.7" piston and the DD10 has an 8" piston.

I'm really happy to find a new DD15 at a really good price and can't wait to hear it!

The Velodyne DD15 is here! This thing is really ridiculous. The whole setup took me less than an hour and the bass frequency response is pretty much ruler flat except for a bump at 50Hz due to the tiny room.

I've talked to couple of my professors at U. of IL. and they convinced me that two subwoofers running in stereo makes no sense. After hearing the Velodyne DD15 in my system, I have no regrets and am no longer curious about two subwoofers.

I'm sorry to end this thread this way, but the DD15 and two professors from my Aerospace and Electrical Engineering department have convinced me that one subwoofer is all I need.

As someone who has run a mono ULD-12 and then a stereo pair of them, I can tell you there is a difference. Just because the ear does not sense the direction of low frequencies, does not change the fact that the information in the low frequency signal may be (and often is) different between the left and right channel. Summing them to mono can and many times does cause cancellations and peaks due to phase cancellation.

As far as your professors having the answers, don't be so sure that because they are professors they have the answers. Ask them is two amplifiers that put out the same power sound the same? What about different speaker cables? Acoustic engineering is a specific field and just because you are an engineer proficient in EE or AE, doesn't mean you know squat about another field.