AC power supply for Nottingham Analogue

Got the falcon but unbeknownst to me the power cable to which I would connect my 294's power cable had the wrong tip. I ordered an ec13 and ec14 adapters and will try it out tomorrow. Anyone buying one of these just know that there were different power connectors used besides the standard. 

migueca, You wrote, "I also considered buying the Phoenix Falcon (after failing to find the Eagle, apparently discontinued and hard to get)."  So far as I know, Phoenix Engineering is defunct along with all the products they made and sold.  So all Phoenix products are hard to get these days.  If you were lucky enough to find a new Falcon, just be sure it makes enough Watts to power your turntable motor.  I think the Falcon is limited to 5W, but I do know that the Notts motor is not very demanding.  Just double check its power consumption.  The Eagle was originally a 15W device that was later increased to 25W, in order to power some of the more demanding motors. You probably don't need an Eagle to power the Nottingham motor.

Lewm,
Yes indeed it was a learning process. When I started searching for a PSU, the first device I heard about was the Eagle - that I couldn't find anywhere. Then I turned to the Falcon, but in the meantime got this Project for almost half price. Made some inquiries to make sure that the Project would suit the Nottingham and finally bought it. 
The Nottingham motor is very low demanding (not sure if it is around 1.5W), and so far it works perfectly. 

So far, The Falcon is working without issue on my 294. The adapters were an inexpensive fix. 

Using a strobe disc I found that my placement of the outboard motor had the deck running slightly slow . I was able to adjust the speed in increments of .01 and I believe I've got it dialed in.

Ive only ab'd "nutshell" from Alice In Chains unplugged with and without the psu. I listened to other tracks and albums as well but without direct comparison. When I make changes to my system I want to know: 

1. Is there a change? 
2. How easily perceptible is that change? 
3. Having heard a change can I unhear it? 
4. Is the change for the better, worse or just different? 
5. Is the change worthwhile considering the cost? 

What I've found is: 

1. Yes
2. After a couple of comparisons I could pick out specific changes and some perceived changes
3. No 
4. For the better
5. Yes

Though subtle at first I noticed more detail on bass guitar, the nuances of tone were more clearly rendered and sharper. I could hear the attack and individual notes more clearly. 

There was more perceived air and clarity around the performers and within the soundstage. The instruments and vocals didn't bleed into each other, there was less overhang in the low end, midbass, and midrange. As a result, detail leapt forward without tipping up the treble. Vocals seemed cleaner and more composed. 

Considering the the cost of the Space 294 and other system components, the falcon psu is a no brainer for the improvement rendered. A little perspective though, if I felt any component in my system was significantly below par with the rest I would upgrade that component first. The falcon is a tweak, a very worthwhile tweak, but still won't provide the results that an upgraded cart, phono pre, speaker, or amp would.