Magnets on windows, bookcases, et al.....I suspect its not the magnetism of the magnet, but the mass that's changing the resonant frequency. I have a very large listening room with high ceilings ( a bear for proper listening), but I have some stones, and other junk in corners, etc. which work for that very purpose.
Using Magnets
I imagine there are at least a few audiophiles out there who use magnets in their systems. Would you like to share your experiences? I should preface my remarks by saying that magnets alone will not create an audio silk purse. I have over 40 room treatment devices of various kinds that work synergistically with the dozens of magnets in my system. It has taken a lot of time and effort to integrate the magnets with all of these devices and the system's components.
First off, for those who have not experimented using magnets, the rewards can be astonishing. I have been using magnets in my system for years. I have also made cables with magnets. I introduced Grover Huffman to the idea of using magnets and other important elements. We were partnered in 2013 in a project that never came to fruition.
Anyone can experiment with N50 or N40 neodymium magnets for 50 cents apiece for the 1/8" x 1/2" discs. All you need to do is put some Blu Tack on the back of a few magnets with the attracting side bare. Then go around your system and place the magnets on the ends of various cords and wires. If you do this methodically you may find an amazing improvement in SQ. Too many magnets may choke the sound. So, you will need to go back and forth with this trial and error method to find out what works and what does not work for you.
For power cords, you can fit cylindrical neodymium magnets inside IECs and plugs on your power cords. This gives excellent results in many cases. The cumulative effect of all these system changes can be an amazing transformation in SQ. My system has been transformed by the use of magnets. If you get similar results you may wonder if highly-touted and extremely expensive brand name cords and wires that use magnets are really worth the price.
I prefaced my remarks by saying there are more than a few audiophiles out there experimenting with magnets. Unfortunate, I believe there are too few who dare to go it alone to try to optimize their systems with magnets. The tendency is to defer to those who have been producing cables for a living and who have garnered a reputation. Those who do dare to step outside the audio box may find the rewards exceed their expectations, for a very reasonable cost. This has been is my personal experience.
First off, for those who have not experimented using magnets, the rewards can be astonishing. I have been using magnets in my system for years. I have also made cables with magnets. I introduced Grover Huffman to the idea of using magnets and other important elements. We were partnered in 2013 in a project that never came to fruition.
Anyone can experiment with N50 or N40 neodymium magnets for 50 cents apiece for the 1/8" x 1/2" discs. All you need to do is put some Blu Tack on the back of a few magnets with the attracting side bare. Then go around your system and place the magnets on the ends of various cords and wires. If you do this methodically you may find an amazing improvement in SQ. Too many magnets may choke the sound. So, you will need to go back and forth with this trial and error method to find out what works and what does not work for you.
For power cords, you can fit cylindrical neodymium magnets inside IECs and plugs on your power cords. This gives excellent results in many cases. The cumulative effect of all these system changes can be an amazing transformation in SQ. My system has been transformed by the use of magnets. If you get similar results you may wonder if highly-touted and extremely expensive brand name cords and wires that use magnets are really worth the price.
I prefaced my remarks by saying there are more than a few audiophiles out there experimenting with magnets. Unfortunate, I believe there are too few who dare to go it alone to try to optimize their systems with magnets. The tendency is to defer to those who have been producing cables for a living and who have garnered a reputation. Those who do dare to step outside the audio box may find the rewards exceed their expectations, for a very reasonable cost. This has been is my personal experience.
- ...
- 29 posts total
- 29 posts total