Ohm Walsh Micro Talls: who's actually heard 'em?

Be well Peter, and best wishes on your flight and most of all, your father! 

Thank you Frazuer1...

Trip got delayed a few days as I forgot that my Swedish passport was only good 
for five years. On Tuesday morning I will know if I can get a temporary passport 
in a few days.

Had the pleasure seeing Tate again, I have done some substantial upgrades since the last time I saw him. I hope he liked what heard. I also gave him the earthquake experience 
4 x 18" long throw woofer driven by a 2000 watt per chanel and a sweep from 1hz - 100hz
Tate could chime in on the experience.
After he left I decided a movie night would sound fun with the 
2/2000 but with that I had to go in and re balance the output levels
and distances (didn't want to screw around with Audessey) so my trusty analog Radio Shack meter got the main duty. Normally I keep the crossover for the subs at 80hz as it allows for a smooth transition between the mains and woofers. But I was very curious 
if maybe 100hz would make the presentation a little livelier....

The movie: The Accountant

Ben Affleck plays a high functioning autistic accountant with some
very special skills, he's a mathematician of the highest order and with that he's accounting skills are highly sought after by the bad guys. One of he's special skill sets are weapons, but mostly a 50 caliber Barrett which if you are familiar with the weapon is an amazing killing machine. I like my movies loud and dynamic, and last night it clicked. The first shot out of the gun literally shock my core the air pressure and and the physical effect on your body
makes for a very real experience (if you ever been next to a large caliber weapon when it's fired) you know what I'm talking about.  The 2/2000 took every thing I threw at them coming very close to 1kw power in the peaks. 

A little bit bit of tweaking helped the speaker a lot, one thing that I didn't try was adding an 1/8" layer of Sorbothane between the cabinet and driver and with that de-couple the drivers from the cabinet. That would most likely enhance the midrange a tweeter tremendously .
Im also curious what some more filler would do as it would prevent aback wave from the bottom of the cabinet.....




So many questions, with so many outcomes......... 🇸🇪

peterr53,

Thanks for working on my speakers.
They sound a lot better now.

There is no doubt that you have the most powerful subwoofers I have ever heard.

The most illustrative test we did on my 2.2000s was monitoring the frequenct response in real time while we were listening to some of my music. Most of the sound was below 5K Hz! It showed me how importatnt the midrange is to good sound reproduction. Basically, 95% of audible music is between 30 HZ and 10K Hz. So, having a 20K tweeter doesn't accomplish much.

I also witnessed the 2.5K roll off of the main Ohm speaker. This isn't a bad thing as long as the tweeter picks up the slack.

In the future, I look forward to reporting on Peter's Walsh 5 upgrade. For now, he is using my 2.2000s as stand-ins and I appreciate his feedback and development work on them. At least the tweeters are pointed in the right direction now.

Good evening everyone....

Should be in Sweden, but decided to wait a few weeks as my dad is out of the hospital and doing a little better.

It's always great to see Tate, and we got some time to chat and listen to
some great music. As for the 4/5000's I got so far as cutting the bottoms out, strip out all the braces etc. 

So the BIG question is were am I going from here? 
Slapping in some braces and call it the day will not happen on my watch
so it will be something wild and esoteric (within reason). I need to dampen down the cabinet as it rings like a cheap bell. So the walls will have a multi layer construction (CLD) with a mix of soft pliable glue/butyl rubber layers, and epoxy infused cement. All the mixes and layer choices will depend on how much I can move the frequency band to a desired point were it will sound proper. The top part of the speaker will have a constraint layer of (see image) aluminum, steel, butyl, and 3/4" thick layer
of aluminum (I might change my mind about that) the Walsh driver will be counter sunk in the plate. This next part is a trick one as I don't want to use bolts/screws, I want to use neodymium magnets on the cabinet side
and on the Walsh driver side sandwiched between some low shore hardness iso-gel. The idea is to totally isolate the driver from the chassis. 
I finally figured out the bracing system. It will be a mix of a special plastic
with constraint layers of a harder layer on each side with butyl rubber sandwiched in between. The deal is that it's very easy to damp to a certain level, but at some point the vibrations have to be dissipated somehow. Kind of how you would damp a tuning fork with your finger.

The bottom will have a familiar pattern of a skyline diffuser to try to mitigate reflexions back to the driver cone. To tune the port I will have a sliding tube system that can get tuned on the fly from outside the speaker.

I attached a few images showing a waterfall plot of some different materials for bracing (guess which one I'm using).

Plywood with a butyl rubber layer, I knocked on the butyl for both samples.
Plastic composite butyl rubber
Empty cabinet
Upper metal rings on a CF plate I might use
https://www.flickr.com/photos/147883144@N08/shares/89Wt27
 

So finally passport in hand and a schedule of departure.....

Today I was testing some glues, in this case a glue for the end of the 
cross braces. Super glue sucked, but I'll try a different kind tomorrow. Gorilla glue was promising but not perfect, but the winner
was the lowly hotmelt glue....lol 
More testing to tomorrow as I will most likely use 3-4 different kinds depending on material or if there's a sheer force in the part.

Anyway more to come soon....🇸🇪