wntrmute- just read your post on vpi forum - that clears up the construction questions for me - thx for the additional info.
I tried the tennis balls and yes, the towers sat perfectly right on top of the tennis balls, just as I planned, and compared with what I'd been listening to (tower basically resting solidly on top of the vpi feet), the sound was far worse - unfocused, honky, lacking bass. Odd, I thought, since it's pressurized air supporting the table - pressurized air as originally designed.
Moving on - from dlcockrun above, if vpi wants 3 psi or less to deal with resonance, tennis balls and racquetballs are built with about 12psi - or so says google. So, I'm thinking neither of those ball solutions come close to the vpi goal, and the solid connection - tower to foot - sounded better than my silly easy tennis ball idea.
For those following this thread, Brf from the vpi forum also provided this:
The first thing to do is to contact VPI and enquire if they have any TNT Ball Suspension conversion kits still available. If so, it's any easy conversion, otherwise you will need to fabricate a few parts to help accommodate the racquet ball. Please see this thread for some ideas. http://vpiforum.com/viewtopic.php?f=9&t=6049&p=13322&hilit=Weather#p13322
If you have leaky air bladder, you can insert some Stans NoTubes sealer which is readily available at most bike stores. (yet, another simple solution!!)
However, while the link provided by Brf provides a nice description of how to construct a solid wood insert for the tower, it does not accommodate a ball. But, wntrmute's elegant solution does include a ball.
So, I took my setup into the direction of a better solid connection and took the vpi feet off. Then, simply supported the table plinth on top of three BDR cones that sit on top of a pair of 1-5/8" x 4" hardrock maple sticks running left to right, at the front and back. That gets the cones up high enough to clear the towers, and gives the tonearm cable plenty of room to gently bend as before. Best of all, it provided a very nice improvement from the prior tower to foot support. Then, I substituted the BDRs for some stillpoint knockoff - don't know what these actually are - and that sounds even better.
I'll guess that my preference for the solid connection over the air bladder/ball support might have something to do with the room and the rack. In my case, the "rack" is custom built into the exterior wall so that each shelf consists of a pair of hardrock maple (same size as above) arms secured to triple thick wall studs so as to extend horizontally into the room. Basically, all gear (except for the amps at the speakers) sit on maple shelves that sit on maple arms that are mounted to an exterior wall. This rack construct came from Rives audio, who provided some designs for the room - cheap, solid, sounds good, looks cool, and forget about moving it.
At this point, I'm moving away from the ball in tower support idea and towards a solid connection to the plinth. Might try a ceraball or small stillpoint under the table next ...
Thx to all for the help.
I tried the tennis balls and yes, the towers sat perfectly right on top of the tennis balls, just as I planned, and compared with what I'd been listening to (tower basically resting solidly on top of the vpi feet), the sound was far worse - unfocused, honky, lacking bass. Odd, I thought, since it's pressurized air supporting the table - pressurized air as originally designed.
Moving on - from dlcockrun above, if vpi wants 3 psi or less to deal with resonance, tennis balls and racquetballs are built with about 12psi - or so says google. So, I'm thinking neither of those ball solutions come close to the vpi goal, and the solid connection - tower to foot - sounded better than my silly easy tennis ball idea.
For those following this thread, Brf from the vpi forum also provided this:
The first thing to do is to contact VPI and enquire if they have any TNT Ball Suspension conversion kits still available. If so, it's any easy conversion, otherwise you will need to fabricate a few parts to help accommodate the racquet ball. Please see this thread for some ideas. http://vpiforum.com/viewtopic.php?f=9&t=6049&p=13322&hilit=Weather#p13322
If you have leaky air bladder, you can insert some Stans NoTubes sealer which is readily available at most bike stores. (yet, another simple solution!!)
However, while the link provided by Brf provides a nice description of how to construct a solid wood insert for the tower, it does not accommodate a ball. But, wntrmute's elegant solution does include a ball.
So, I took my setup into the direction of a better solid connection and took the vpi feet off. Then, simply supported the table plinth on top of three BDR cones that sit on top of a pair of 1-5/8" x 4" hardrock maple sticks running left to right, at the front and back. That gets the cones up high enough to clear the towers, and gives the tonearm cable plenty of room to gently bend as before. Best of all, it provided a very nice improvement from the prior tower to foot support. Then, I substituted the BDRs for some stillpoint knockoff - don't know what these actually are - and that sounds even better.
I'll guess that my preference for the solid connection over the air bladder/ball support might have something to do with the room and the rack. In my case, the "rack" is custom built into the exterior wall so that each shelf consists of a pair of hardrock maple (same size as above) arms secured to triple thick wall studs so as to extend horizontally into the room. Basically, all gear (except for the amps at the speakers) sit on maple shelves that sit on maple arms that are mounted to an exterior wall. This rack construct came from Rives audio, who provided some designs for the room - cheap, solid, sounds good, looks cool, and forget about moving it.
At this point, I'm moving away from the ball in tower support idea and towards a solid connection to the plinth. Might try a ceraball or small stillpoint under the table next ...
Thx to all for the help.