Switched or Unswitched outlets--please

Theduke: Thanks! I had a feeling after writing that piece that such was the case. You are right. To make it simple (which I should have done to begin with) is leave the items that are used the most frequently in an unswitched outlet and the reverse for all other pieces.

Thanks for getting that right!

In the end, Djones1915 has to decide what pieces of equipment he wants burning up power 24/7 and which ones are best left "off" until ready to use them. I found out the expensive way that leaving the monos on standby all the time racked up the power bill something fierce - they draw the same amount of current in standby as they do in use. That is a consideration.

Actually, my Furman has a power switch on the front and I simply turn it on and my equipment comes on then--whatever I had on when turned off--usually the monos, 5 channel, --the rest, I turn off before shutting down the Furman.

Is this wrong? I DO NOT want an electric bill any higher than it has to be??

BTW--my Cable DVR is plugged into a seperate power supply so I do not lose programmng when turning everyhing else off.

My amps are Bryston & seem to work fine right away without warm up time?

Djones1915: You certainly are not doing anything "wrong". My equipment, except for the monos is plugged into an APC power conditioner with battery back-up. Even so, I turn off all the equipment before shutting down the APC. In an electrical storm I unplug the APC.

Sounds like you have a nice system.

Thanks Puerto & others--I appreciate your time & wisdom