My Line Arrays and Dynaudio monitor - where to go


I’m close to pulling the trigger on a pair of Dynaudio Confidence C1’s but I’m hesitant.

I was at the CES show in Vegas to listen to a variety of speakers. We (wife and I) came away with the feeling that we weren’t getting what we wished for in our current line array speakers. There seems to be an emotional bond to the music that just doesn’t get communicated in some types of music. Some speakers we heard at the CES show had a 3D holographic image that was just mesmerizing. In particular the Dynaudio monitor line and the Opera monitor. Vocals as well were realistic and the image was simply “you are there” quality and this was the line under the Confidence series. Also great were the Silverline Boleros.

The line arrays I have are great and an unbelievable bargain but sometimes feel that the sound staging which is rather flat, vocals which are less than human and overall high frequency energy which is a bit unbalanced IMHO.
A few days before the show I dropped my Oppo BDP83 SE player off with Rick Schultz of Tweakaudio for some additional mods. He offered a solution to the excessive HF energy by felting around all of the tweeter drivers, there are 12 of them. I allowed a few days of break in for the player (caps were involved in the mod) then felted around the drivers. Between the mods which were spellbinding by themselves and the felting (done afterwards), we have some amazing sound coming from the line arrays. These may be the most dynamic speakers I’ve ever heard and I’ve heard a lot of them. Now I seemed to have tamed the HF problem as well. Imaging had greatly improved though not nearly the level of the Dyns or other fine speakers we’ve listened too. Vocal too still aren’t to what I’d wish they be. As well these line arrays are giants, 28 drivers in all and reaching at least 6’ high. But these speakers swing dynamically with bass way down low and highs into the Netherlands.

Reading the reviews on the C1’s they appear to be a world class speaker with amazing bass capabilities given the right amplification. I use Nuforce 9 SEV2 monoblocks (soon to be V3’s) and a Cary SLP05 tube preamp. My amps will register 160 watts with a damping factor of 4000. The perform amazing bass duties on the line arrays, stunning in fact. The Dyn’s from what I’ve read need current. I’m unsure how current equates with the Nuforce’s. I’m unsure in fact in I won’t miss the dynamic capabilities of the line arrays. I thought if I missed the low bass on the C1’s and go locate a HQ sub which, doing double duty as a HT system, wouldn’t be a bad idea anyway.

Just curios what the knowledgeable folks in this forum thought about a speaker change and in particular the Dynaudio C1’s.
128x128desalvo55
Not meaning to hijack the thread, but I'd be curious to hear from anyone who has listened to Dynaudio (especially the Confidence line) with Bryston, Spectron or any of the ICE amps, such as those from Bel Canto or Wyred4Sound.
We've been back and forth between the LS6's and the C1's.

With the C1's, half of my music collection which consists of everything from Mozart and Bach, to Porcupine Tree and Radiohead, to Neil Young and Robert Johnson, to Joan Osborne and Jeff Beck, half my music is disappointing in a way. Take B-Tribe. Now I know the C1's will not play B-Tribe. The low bass notes and soaring highs and the space and ambiance just doesn't come through IN COMPARISON with the LS6's. Anything with huge dynamic contrasts strain the little guys. The LS6's simply destroy just about any other speaker I've listened too in this regard and I've listened to a lot. Not just that but they get so deep into the recording and resolve the full spectrum whether you like it or not. The downside is the midrange. The C1's have the edge in vocals and midrange purity. The highs as well won't hurt you like the LS6's can at times. Anyone who owns a pair of LS6's has to felt around the tweeters, all 12 of them. Soundstage goes the C1's in our room, but we had to move the couch forward in order to get depth into the recordings.

It would be nice to keep both sets of speakers, but we simply can't.

Friends outside the audiophile world (casual listeners) prefer, just barely, the C1's but add "you need a subwoofer". A Fathom F113 is on order. They are generally stunned at how music flows from the line arrays. They keep looking for a sub!

So we are spoiled by what these line arrays can do. The Nuforces drive them effortlessly into stadium levels where my wife likes the volume at, and at these levels, they never lose control over the lower registers.

With the C1's there seems be a discontinuity between the bass and the rest of the music. It's as if there simply not enough power. I've read the reviews and this was not a complaint, but it is in my system.

On my radar now is a McCormick DNA 500. I believe this amplifier will drive the C1's just fine. I was worried a bit about the output impedance of my Cary SLP 05 but at 400 Ohms, seems like a good match.

Thanks for your thoughts.
You seriously need to consider the Pass X250.5 as a minimum, but the X350.5 will do better. A friend had the X250.5 with Contour S3.4's and then later the S5.4's. It was truely magical. Good luck with your journey. L
I thought about the Pass X350.5. Wasn't sure if it was a good match for my C1's although it certainly has the power and then some.

Trying to pick up a pair of Cary CAD MB500's. There has to be something magical matching a Cary with a Cary right?

The JC1 is also on my radar.

Seems like every time I find a used amplifier that I'd like to purchase, it gets sold. I thought we have a bad economy.

I'll check out the Pass amps too.

I'm starting to miss the sound of our LS6 line arrays. That bottom end was just addicting and on most recordings (usually older ones), the top end was magical.

The C1's have a 1 note bass. It comes and goes as it pleases for no particular reason. It's like "oh, did you hear that - a bass note". I know it's NOT supposed to be like this.

I'm playing with cables, both RCA and balanced and although I get a warmer sound with my balanced cables, it still plods around the bass. I'm starting to develop a nice pair of biceps as I move the LS6's and Dynaudio C1's on their lead shot filled stands. I might imagine I would reinforce the mid bass on the C1's by closing them in on the back wall, but I seem to lose that magic in the soundstage. Not to mention that live human being standing between the speakers singing oh so soulfully.

The Nuforces are highly regarded in the bass region (well hell, every region), and have this high damping factor, 4000 I believe so even though they're shy on watts I wonder if it is in fact that they simply need more raw power to unconstrain the bass.

As I've written before we really like these amps. I'm in the queue for the version 3 upgrade which does what? It lowers the wattage to 160wpc! The amp I'm looking for has to have the strengths of the Nuforce's and the power to drive the C1's with no effort.

(I know this is a can of worms as there are many who simply dislike the Nuforce sound)

Maybe I should keep those LS6's..
Desalvo,

I do not have line arrays but I have a pair of Dynaudio Contour 1.3 mkii monitors and other larger full range designs. The Dyns have fantastic, almost unbelievable bass for such a small box, however, small monitor designs are inherently disadvantaged in comparison to larger designs when it comes to impact and overall dynamics in the low end. They are just not able to shake the rafters the same as a equally good larger design in general. The difference may only be noticeable to many when the two are heard side by side. The solution, if it is an issue to the listener is typically to add a good sub. That usually brings the best of both worlds to the table in regards to imaging, detail and finesse from amonitor coupled with a fully capable bottom end.

Subwoofer aside, I think more power and current in general will always benefit the Dynaudios regardless as well.