2. speakers
  3. 1184887136

GMA Callisto vertical tilt and placement issues

I just bought a pair of well broken in GMA Callistos from my dealer the other day.The basses, for reasons I will not go into, were new with the rear screws preset at 31/4 inches as opposed to the 113/16” that the manual says is level .Everything else is set up as per instructions with a 8 foot triangle (equal listening distance T ) & the 53 degree toe in angle with the front of the speakers being 36" from the rear wall of my well dampened bay window also 8 feet & 51/2 feet from one side wall & 5 feet from the other as the window is not dead center.To my mind this should downward tilt the speaker to near where my ears are as the large model one sand filled Tyler acoustics stands are 25.5 " with the cone feet placing my ears at woofer height since my couch is a little on the low side. The interesting thing is the speaker sounds better standing up & at 10 feet (behind the couch)?.The speakers image is wider as is the soundstage & the sound a little warmer as they are just a tad metallic sitting down.Do any of you with Callistos have any useful tips re the vertical adjustment & also the placement in general? I am using the following; Rega Saturn,Portal Panache,PSB Srtata Subsonic 3i(modded), Analysis Plus Solo Crystal IC & oval 9 cable,PS Audio Duet,Oyaide receptacle.Black Sand Violet Z1 AC cords all around, 6 Audioprism Quietlines plugins in & around adjacent circuits .Because of adjacent rooms & hardwood with a small 8x5 carpet in front of the speakers, the room is slightly bright with some flutter echo from the stair well.

Thanks

Bill

audiopath49
mijknarf
266 posts
 
The tweeter should be at your ear height, not the woofer. They are designed for 24" stands, so your stands are adding 1.5" plus the cones you stated you are using add more (not specified in your post) so they definately are NOT set up correctly.

My advice would be to loose the spikes, this would get them as low as possible. Then set the rear leveling screws to nominal per the manual. Then raise the leveling screws (raise the rear of the speaker) to tilt the tweeter down until they sound best.

My advice may only get you so far, ultimately, I'd give Roy a call at the shop tomorrow and get his advice.
gr8tfuljeff
14 posts
 
I have a pair and it took me a while to get them just right. I went by the book as far as placement, but I'm not sure I have mine set to the 53 degree tow in or not. Mijknarf is right though.. What made the most diffference for me was finding the right height for the leveling screws. Once I found that... wow! I haven't moved them since.

hope that helps.
mbacinello
54 posts
 
I have a pair and have also struggled to set them up properly... I believe i have my placement spot on in terms of the equal legged T position, and the tilt I think is also correct, that said I find they really throw a lot of energy off axis, (lots of reflection and echo at certain frequencies) to the point that to my ears in my room, room treatments will be necessary to get the best sound.

More to discover