Rogue Owners Unite


Hello Rogue Owners. The goal of this thread is to let Rogue owners discuss the tubes they have tried in their amps/preams and discuss other tweeks that have been implemented with success. It would also be nice if you'd post your system components to help us compare notes.
buckingham
Hello, does anyone find that the atlas magnum amp produces a hum through the speakers when paired with the kt120s? I just put these tubes in my titan atlas magnum and there is a hum through the speakers even with nothing else plugged in. I didn't notice it with the kt90s. I use a fairly cheap power strip with audioquest power and speaker cables and dynaudio excite x16s. When the preamp is also plugged in the hum does not fluctuate with volume control. Is this a ground loop or noise from the amp? Can it be quieted? Thanks.
It's probably a ground loop hum. I had something like that on the same amp (as well as many others) and a cheater plug (3 prong into 2 adapter on the AC cord) solved the issue. Try the amp first, then the preamp and so on.

Good luck.
Thanks, Joeinid. I tried that and it didn't fix the hum. I think it is the just the amp. I can't hear the hum from my listening position. I've read that tube amps commonly do make some sound through the speakers.
Reviewer, Kal Rubinson has done much tube-rolling on Rogue gear. His writings can be found over on Audio Asylum.
Happy Listening!
Hello new on this forum but have been a rogue owner and audiogon member for ten years or so. After a bad tube and reading some Super Magnum info I've taken my M120 and 99 into rogue for some repair and updating. The 99 is going from magnum to Super mag, but not sure about the M120 they can get repaired but if I'm going to update now would be the time. So question would be who's compared the 120 to 150 and or the 180. and what are your thoughts on the differences . The ONLY compliant have had with any of the Rogue gear is how hard the M120s are on tubes I've had some very pricey tubes go bad prematurely and while it could be 100% on the tubes quality control. I have to wonder if the amps would be a bit easier on them could I still have those great sounding Tesla (KR-KT88) (now known as EAT).