Get a licensed electrician to do the work. It's not worth messing up. The best way is to run a dedicated 220v 30amp circuit to a toroidal transformer to step it down to 110v. Break this off into 4 separate 20 amp circuits. These are going to have 55v on each pole out of phase (great noise cancelling). I recommend using 10 gauge solid wire (although there is some debate on solid vs stranded on this application). I use one circuit for amps, one for analog, one for digital, and one for the TV. Use hospital grade recepticals. You can independently ground the dedicated line (which I found helps quite a bit), but that can be a code violation in some areas (CA is probably pretty sticky on that point I imagine). Hope that helps--e-mail me if you need more info.
What do I do for a dedacated circuit?
First off, Id like to say sorry for all the times this has been asked on this board. I have already read some of the other times this question has been asked. Now that I am ready to do this myself, I thought I would get the opinion of the experts first.
If I have an electrition install a dedicated circuit, would I want that circuit indapendantly grounded?
I am going to buy an outlet from First Impression Music, so I know that I would need copper wire only.
I dont know that much about electricity, but I am assuming I would need a 20 amperes circuit. Is that correct?
My amplifier is plugged directly into the wall recepticle, along with a power conditioner that feeds my pre and cd player.
Would I want to have two dedicated circuits installed so I can run just my power amp off one and my pre & cd player off the other? Or is one fine?
How would I know that the electricion actually did what he was supposed to do? Is there someone I could have come out to my house in the Sacramento, CA. area to actually inspect it? Or is there anyone who is an audiophile/electricion or just a trustworthy electricion who makes it out to the Sacramento, CA. area that you could suggest?
If you could answer my questions for me that would be greatly appreciated!
Thank you
If I have an electrition install a dedicated circuit, would I want that circuit indapendantly grounded?
I am going to buy an outlet from First Impression Music, so I know that I would need copper wire only.
I dont know that much about electricity, but I am assuming I would need a 20 amperes circuit. Is that correct?
My amplifier is plugged directly into the wall recepticle, along with a power conditioner that feeds my pre and cd player.
Would I want to have two dedicated circuits installed so I can run just my power amp off one and my pre & cd player off the other? Or is one fine?
How would I know that the electricion actually did what he was supposed to do? Is there someone I could have come out to my house in the Sacramento, CA. area to actually inspect it? Or is there anyone who is an audiophile/electricion or just a trustworthy electricion who makes it out to the Sacramento, CA. area that you could suggest?
If you could answer my questions for me that would be greatly appreciated!
Thank you
- ...
- 8 posts total
- 8 posts total