Need more bass response


I'm in dire need of more bass to balance out the sound in my system. Granted it's not high, high end but safe to say I have a fair amount invested. It is a Belles 150 HotRod amp linked to a Rogue Magnum 99 pre. Source is a Rega Jupiter ( newest model) and speakers are PSB silvers. The Rogue has a 3 position gain knob which leaves me wanting for another notch higher.
I'm asking if I were to add or change any component, what would the peanut gallery suggest? The cables are not equal to the quality of my system (read: I'm not sold on the difference between cables) yet they are not crap.
Go ahead- I'll take my licks.
Thanks in advance.
axspike
I have a similiar problem with recordings, some of my favorite rock albums suck on my system. When I had inexpensive solid state gear my rock collection sounded decent. I think the problem is the quality of the recording possibly and the fact that a highend system will reveal what is good and bad. When I audition gear in shops I usually bring a couple of favorite recordings and a couple that are not so hot and have found that they still suck on even the more expensive gear. Cable upgrades are not snakeoil and will help, also look into robert harley's book guide to high end audio, he gives a advice on room acoustics. I think I remember him saying a square room is the worst possible situation but you can have. Goodluck
If jazz sounds great but not rock, it's probably not the system but the recordings that are causing your consternation. "From the Cradle" is hardly a mastering wonder. (Not to brag, but I've heard EC do most of that material in a club, so I have some basis for comparison.)

I certainly wouldn't do anything that would mess up your jazz reproduction. Adding a sub might be the ticket, though your Silvers are no slouch. Rearranging the room could help, but if it's your living room that's probably a no-go.

Here's a radical suggestion: Get an equalizer. Bypass it for good jazz recordings, but tweak it a bit on other stuff to see if it improves things. (Purists will howl, but it's not their ears, now, is it?)

Power conditioner? From a guy who has his doubts about cables? C'mon, you know better than that!
I have a Rogue 66 with a Rogue 88 amp. I replaced all tubes with Mullards (preamp takes 2 12au7's). I can't believe the base. I may have to put back one of the nos Philips that Rogue puts in from the factory to get a little shimmer back in. What I am saying is try a couple of Mullards if you want base.
Ax:

Bomarc is on to something. I recently sold my solid state CJ line stage pre as I am reconfiguring my main system. I replaced the CJ with an old Hafler 100 pre that had been sitting in storage for years.

Eureka! I had the same nagging problem with my system --- sounded great with jazz, orchestral, acoustic, and vocal material, but SUCKED the life out of rock. In fact, I had stopped listening to my rock collection over the years precisely because of this. The Hafler, with its tone controls, has made it so I can listen to rock again, and I love it! Now I'm not going to lie, the Hafler is nowhere near as detailed, the soundstage is not as well defined, and it is a noisy little bugger, but ahhhh, the glorious BASS response.

I am going to grab an old Adcom 565 pre that has tone controls and is actually pretty decent sounding, and I'm going to use the system with it primarily for rock. I am lucky to have a second Magneplanar/Roksan-based system that I will listen to jazz, acoustic, etc. on.

Please do yourself a favor and consider tone controls at least as seriously as you consider cables and other tweaks. I know that this advice will be looked down upon by many of the pointy-headed audiophiles that lurk here, but what will it hurt to experiment? Musical Fidelity makes/made such a device called the X-tone. You've nothing to lose by bucking the audiophile orthodoxy and giving tone controls a try.
yay Doc: let's hear it for Tone Controls!
I bought a $10K list Accuphase preamp for, among other reasons, Tone Controls! And for late nights when everyone else in the house is sleeping, it even has 3-stages of Loudness Compensation. All of that extra circuitry has an internal bypass feature; 95% of the time I use it bypassed anyway. But when you have marginal source material that desparately needs some Eq then who cares about absolute purity?